Leading edge ac dimmer.bak
niliha·ravelights-hardware·leading-edge-ac-dimmer/leading-edge-ac-dimmer.bak.kicad_pcb
About the Leading edge ac dimmer.bak PCB
Leading edge ac dimmer.bak is an open source PCB design by niliha, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 47.6 × 30.5 mm, with 21 components from 13 distinct parts.
Other key parts include the MOC3023M and EL817. By type, the board carries 13 resistors, 3 connectors, 2 ICs, 1 transistor, 1 diode and 1 capacitor.
From the project
PCB designs for driving light fixtures like WS28XX LED strips or light bulbs
This PCB design allows to dim 8 incandescent light bulbs using a microcontroller.
Note: In version v0.1 there is a design error which leads to arcing on the snubber resistor. This can be fixed by omitting the snubber circuit at the cost of not being able to drive inductive loads. In a future revision, the snubber resistor will be replaced with a more suitable one.
Main components on the Leading edge ac dimmer.bak
Leading edge ac dimmer.bak bill of materials (BOM)
21 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOC3023M | Lite-On_SOP6_6.5x7.3mm_P2.54mm | U1 |
| 1 | EL817 | SMDIP-4_W7.62mm | U2 |
| 1 | BT136-600 | TO-252-2 | Q1 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J4 |
| 1 | MB10S | TO-269AA | D1 |
| 1 | 10nF >400V | C_1206_3216Metric | C1 |
| 1 | 330R | R_0805_2012Metric | R1 |
| 1 | 10kR | R_0805_2012Metric | R2 |
| 2 | 1kR 1/4W | R_1206_3216Metric | R3, R4 |
| 3 | 120R 1/4W | R_1206_3216Metric | R5, R6, R13 |
| 6 | 100k 1/4W | R_1206_3216Metric | R7, R8, R9, R10, R11, R12 |
Leading edge ac dimmer.bak design files
The KiCad project lives in the niliha/ravelights-hardware repository on GitHub; these links point at the commit this page was built from.
Leading edge ac dimmer.bak: common questions
How big is the Leading edge ac dimmer.bak PCB?
The Leading edge ac dimmer.bak measures 47.6 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Leading edge ac dimmer.bak?
21 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Leading edge ac dimmer.bak design files?
From the niliha/ravelights-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Leading edge ac dimmer.bak design in my own project?
Yes, under the terms of its GPL-3.0 license, which niliha chose for the repository.