Leading edge ac dimmer
niliha·ravelights-hardware·leading-edge-ac-dimmer/leading-edge-ac-dimmer.kicad_pcb
About the Leading edge ac dimmer PCB
Leading edge ac dimmer is an open source PCB design by niliha, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 54 × 96 mm, with 57 components from 10 distinct parts.
Other key parts include the MOC3023M and EL817. By type, the board carries 31 resistors, 9 ICs, 8 transistors, 8 capacitors and 1 diode.
From the project
PCB designs for driving light fixtures like WS28XX LED strips or light bulbs
This PCB design allows to dim 8 incandescent light bulbs using a microcontroller.
Note: In version v0.1 there is a design error which leads to arcing on the snubber resistor. This can be fixed by omitting the snubber circuit at the cost of not being able to drive inductive loads. In a future revision, the snubber resistor will be replaced with a more suitable one.
Main components on the Leading edge ac dimmer
Leading edge ac dimmer bill of materials (BOM)
57 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | MOC3023M | Lite-On_SOP6_6.5x7.3mm_P2.54mm | U1, U2, U3, U4, U5, U6, U7, U8 |
| 1 | EL817 | SMDIP-4_W9.53mm | U9 |
| 8 | BT136-600 | TO-252-2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | MB10S | TO-269AA | D1 |
| 8 | 10nF >400V | C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | 470R | R_0805_2012Metric | R1, R4, R7, R10, R13, R16, R19, R22 |
| 8 | 300R 1/4W | R_1206_3216Metric | R2, R5, R8, R11, R14, R17, R20, R23 |
| 8 | 33R 1/8W | R_0805_2012Metric | R3, R6, R9, R12, R15, R18, R21, R24 |
| 1 | 10kR | R_0805_2012Metric | R25 |
| 6 | 100k 1/4W | R_1206_3216Metric | R26, R27, R28, R29, R30, R31 |
Leading edge ac dimmer design files
The KiCad project lives in the niliha/ravelights-hardware repository on GitHub; these links point at the commit this page was built from.
Leading edge ac dimmer: common questions
How big is the Leading edge ac dimmer PCB?
The Leading edge ac dimmer measures 54 × 96 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Leading edge ac dimmer?
57 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Leading edge ac dimmer design files?
From the niliha/ravelights-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Leading edge ac dimmer design in my own project?
Yes, under the terms of its GPL-3.0 license, which niliha chose for the repository.
More boards in ravelights-hardware
Pwm dc dimmer
niliha
61 × 125.5 mm69 parts2LGPL-3.01Esp32shield
niliha
83 × 71 mm52 parts2LGPL-3.01Ac dimmer
niliha
50 × 36 mm22 parts2LGPL-3.01Leading edge ac dimmer.bak
niliha
47.6 × 30.5 mm21 parts2LGPL-3.01Signal booster
niliha
18.8 × 18.8 mm19 parts2LGPL-3.01Spi port expander
niliha
35 × 43 mm12 parts2LGPL-3.01