Esp32-monitor
nivedrajeeshvp·esp32-monitor·hardware/ESP_32_MONITOR.kicad_pcb
About the Esp32-monitor PCB
Esp32-monitor is an open source ESP32 PCB design by nivedrajeeshvp, published on GitHub. It is a 2-layer board measuring 124.8 × 77.5 mm, with 24 components from 16 distinct parts.
Its main chip is the ESP32_30pin, from the ESP32 family. Other key parts include the SHT31-DIS and LM2596S-5. By type, the board carries 11 resistors, 5 connectors, 3 ICs, 3 capacitors, 1 diode and 1 inductor.
From the project
ESP32 Gas and Environmental Monitoring Dashboard
This directory contains the KiCad hardware design files for the Nexus Monitor ESP32 Gas and Environmental Monitoring System.
- Schematic (.kicadsch): Circuit diagram and component connections. - PCB layout (.kicadpcb): Component placement and routing. - Project file (.kicadpro`): KiCad project configuration.
Design files and supporting documentation will be added here as they become available.
Main components on the Esp32-monitor
Esp32-monitor bill of materials (BOM)
24 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SHT31-DIS | Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U1 |
| 1 | ~ | ESP32_30pin | U2 |
| 1 | LM2596S-5 | TO-263-5_TabPin3 | U3 |
| 1 | MQ-3 | MQ-6 | J1 |
| 1 | MQ-137 | MQ-6 | J2 |
| 1 | MQ-138 | MQ-6 | J3 |
| 2 | Conn_01x02 | TerminalBlock_RND_205-00232_1x02_P5.08mm_Horizontal | J4, J5 |
| 1 | 1N5824 | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 68uH | L_Radial_D12.5mm_P7.00mm_Fastron_09HCP | L1 |
| 1 | 100nF | C_0603_1608Metric | C1 |
| 1 | 470uF | CP_Radial_D12.5mm_P5.00mm | C2 |
| 1 | 220uF | CP_Radial_D8.0mm_P3.50mm | C3 |
| 4 | 4.7 K | R_0603_1608Metric | R1, R2, R6, R9 |
| 1 | 200 K | R_0603_1608Metric | R3 |
| 3 | 560 K | R_0603_1608Metric | R4, R7, R10 |
| 3 | 470 K | R_0603_1608Metric | R5, R8, R11 |
Esp32-monitor design files
The KiCad project lives in the nivedrajeeshvp/esp32-monitor repository on GitHub; these links point at the commit this page was built from.
Esp32-monitor: common questions
What microcontroller does the Esp32-monitor use?
The Esp32-monitor is built around the ESP32_30pin, from the ESP32 family.
How big is the Esp32-monitor PCB?
The Esp32-monitor measures 124.8 × 77.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32-monitor?
24 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-monitor design files?
From the nivedrajeeshvp/esp32-monitor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-monitor design in my own project?
The repository has no license, so all rights stay with nivedrajeeshvp. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-monitor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k