Chickensticks
npgo22·chickensticks
About the Chickensticks PCB
Chickensticks is an open source STM32 PCB design by npgo22, published on GitHub. It is a 4-layer board measuring 42 × 100 mm, with 96 components from 53 distinct parts.
Its main chip is the STM32L433CCTx, from the STM32 family. Other key parts include the USBLC6-2SC6, TJA1042T-3, LR2021IMLTRT, LP5907MFX-3.3 and MCP73831-2-MC. By type, the board carries 32 capacitors, 20 resistors, 11 diodes, 10 connectors, 7 ICs and 6 inductors.
Main components on the Chickensticks
Chickensticks bill of materials (BOM)
96 components, 53 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | STM32L433CCTx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TJA1042T-3 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LR2021IMLTRT | QFN-32_EP_5.8x5.8_Pitch0.5mm | U4 |
| 1 | LP5907MFX-3.3 | SOT-23-5 | U5 |
| 1 | MCP73831-2-MC | DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U6 |
| 1 | BQ29700 | WSON-6_1.5x1.5mm_P0.5mm | U7 |
| 1 | Si2371EDS | SOT-23 | Q1 |
| 1 | DMG9926UDM | SOT-23-6 | Q2 |
| 1 | 2N7002 | SOT-23 | Q3 |
| 1 | 25 MHz | 3225-4P-L | Y1 |
| 1 | TG2520SMN 32.0000M-MCGNNM0 | Oscillator_SMD_SeikoEpson_TG2520SMN-xxx-xxxxxx-4Pin_2.5x2.0mm | Y2 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | HRO_TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 3 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3, J6, J7 |
| 2 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4, J5 |
| 1 | S02-25200300 | S02-25200300-Outline | J8 |
| 1 | SMA | SMA_Amphenol_132203-12_Horizontal | J9 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | 18650 | BatteryHolder_Keystone_1042_1x18650 | BT1 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MLT-7525 | MLT-7525 | BZ1 |
| 1 | 500mA | Fuse_0805_2012Metric | F1 |
| 1 | 250mA | Fuse_0805_2012Metric | F2 |
| 1 | SKRPANE010 | SKRPANE010 | SW1 |
| 2 | MM3Z10VT1G | SOD-323 | D1, D5 |
| 9 | LED_Small | LED_0603 | D2, D3, D4, D6, D7, D8, D9, D10 +1 |
| 1 | 7.5nH | L_0402 | L1 |
| 1 | 3.9nH | L_0402 | L2 |
| 1 | 4.7nH | L_0402 | L3 |
| 1 | 12nH | L_0402 | L4 |
| 1 | 22nH | L_0402 | L5 |
| 1 | 24nH | L_0402 | L6 |
| 3 | 1uF | C_0805 | C1, C13, C15 |
| 8 | 100nF | C_0603 | C2, C3, C4, C5, C6, C14, C25, C32 |
| 3 | 100n | C_0603 | C7, C10, C11 |
| 2 | 10pF | C_0603 | C8, C9 |
| 1 | 2.2uF | C_0805 | C12 |
| 2 | 1.8pF | C_0402 | C16, C18 |
| 1 | 22pF | C_0402 | C17 |
| 1 | 3.9pF | C_0402 | C19 |
| 1 | 7.5pF | C_0402 | C20 |
| 1 | 47pF | C_0402 | C21 |
| 1 | 1nF | C_0402 | C22 |
| 1 | 18pF | C_0402 | C23 |
| 1 | 2.2pF | C_0402 | C24 |
| 6 | 22uF | C_0805 | C26, C27, C28, C29, C30, C31 |
| 2 | 5.1k | R_0603 | R1, R2 |
| 12 | 10k | R_0603 | R3, R4, R5, R6, R7, R8, R9, R10 +4 |
| 2 | 100R | R_0603 | R13, R20 |
| 1 | 100k | R_0603 | R14 |
| 1 | 330R | R_0603 | R16 |
| 1 | 2k | R_0603 | R17 |
| 1 | 2.2k | R_0603 | R18 |
Chickensticks design files
The KiCad project lives in the npgo22/chickensticks repository on GitHub; these links point at the commit this page was built from.
- Layoutchickensticks.kicad_pcb
- Schematicchickensticks.kicad_sch
Chickensticks: common questions
What microcontroller does the Chickensticks use?
The Chickensticks is built around the STM32L433CCTx, from the STM32 family.
How big is the Chickensticks PCB?
The Chickensticks measures 42 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Chickensticks?
96 components, from 53 distinct parts. The full bill of materials is listed on this page.
Where can I download the Chickensticks design files?
From the npgo22/chickensticks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Chickensticks design in my own project?
The repository has no license, so all rights stay with npgo22. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Chickensticks without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k