4 open source boards using the LR2021IMLTRT

Real designs built with the LR2021IMLTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The LR2021IMLTRT in open source designs

The gallery holds 4 open source boards using the LR2021IMLTRT from 4 GitHub repositories; a typical one measures about 42 × 100 mm and carries around 96 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Lexicon hardware by superlexicon.

Microcontrollers on boards using the LR2021IMLTRT

What boards using the LR2021IMLTRT are built for

LR2021IMLTRT: common questions

Where can I find a LR2021IMLTRT reference design?

Each of the 4 boards on this page is a real design using the LR2021IMLTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LR2021IMLTRT?

The BQ29700, LP5907MFX-3.3, MCP73831-2-MC, STM32L433CCTx and TJA1042T-3 appear in the most repositories here.

Which microcontrollers do boards using the LR2021IMLTRT use?

Most are built on STM32 (3) and ESP32 (1).

How big is a typical board using the LR2021IMLTRT?

The median is 42 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the LR2021IMLTRT?

By GitHub stars, Lexicon hardware by superlexicon, with 1 stars.

Can I simulate one of these boards using the LR2021IMLTRT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part