8 open source boards using the BQ29700
Real designs built with the BQ29700, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Smart sensor battery pack
FeatureNAB
23 × 56 mm30 parts2LCC-BY-NC-4.0215RP2040/RP2350
Sentinel HYDRA
SridharCodeVersion
93.5 × 91 mm135 parts6LApache-2.00RP2040/RP2350
Sentinel HYDRA
SridharCodeVersion
93.5 × 91 mm135 parts6LApache-2.00STM32
Chickensticks
npgo22
42 × 100 mm96 parts4LNo license0ESP32
CARVanta Sentinel v2
SridharCodeVersion
100 × 100 mm86 parts6LApache-2.00ESP32
CARVanta Sentinel v2
SridharCodeVersion
100 × 100 mm86 parts6LApache-2.00STM32
Chickenstick
npgo22
42 × 100 mm96 parts4LNo license0STM32
Chickenstick
npgo22
42 × 100 mm96 parts4LNo license0
How designs wire the BQ29700
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the BQ29700 connects to, and the resistors, capacitors and other passives placed on it.
- The VSS_4 pin has a series capacitor on 4 of 6 designs, most often 100 nF.
- The BAT_5 pin has a series capacitor on 4 of 6 designs, most often 100 nF.
- The BAT_5 pin has a pull-up to VBAT on 4 of 6 designs, most often 330 Ω.
- The V-_6 pin has a resistor to GND on 4 of 6 designs, most often 2.2 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NC_1pin 1 | Connected to: Not connected 67% · 3.3V 33% |
|
| COUT_2pin 2 | Connected to: A connector 33% |
|
| VSS_4pin 4 | Connected to: TPS7A4533 33% |
|
| BAT_5pin 5 | Connected to: TPS7A4533 33% |
|
| V-_6pin 6 | Connected to: Signal 67% · 3.3V 33% |
|
| PIN_7_7pin 7 | Connected to: 3.3V 100% | — |
| PIN_8_8pin 8 | Connected to: A connector 100% |
|
| PIN_10_10pin 10 | Connected to: 3.3V 100% | — |
| PIN_12_12pin 12 | Connected to: Signal 100% |
|
| PIN_13_13pin 13 | Connected to: Signal 100% |
|
| PIN_14_14pin 14 | Connected to: 3.3V 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smart sensor battery pack by FeatureNAB, Chickenstick by npgo22, Chickenstick by npgo22 and Chickensticks by npgo22.
The BQ29700 in open source designs
The gallery holds 8 open source boards using the BQ29700 from 6 GitHub repositories; a typical one measures about 67.8 × 100 mm and carries around 96 components.
88% use four copper layers or more, and 50% carry an open source license.
The most starred is Smart sensor battery pack by FeatureNAB.
Parts used alongside the BQ29700
Microcontrollers on boards using the BQ29700
What boards using the BQ29700 are built for
BQ29700: common questions
Where can I find a BQ29700 reference design?
Each of the 8 boards on this page is a real design using the BQ29700. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ29700 VSS_4 pin connected?
The VSS_4 pin has a series capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the BQ29700.
How is the BQ29700 BAT_5 pin connected?
The BAT_5 pin has a series capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the BQ29700.
What resistor goes on the BQ29700 V-_6 pin?
The V-_6 pin has a resistor to GND on 4 of 6 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 6 open source designs using the BQ29700.
What parts are used alongside the BQ29700?
The LP5907MFX-3.3, LR2021IMLTRT, MCP73831-2-MC, STM32L433CCTx and TJA1042T-3 appear in the most repositories here.
Which microcontrollers do boards using the BQ29700 use?
Most are built on STM32 (3), ESP32 (2) and RP2040/RP2350 (2).
How big is a typical board using the BQ29700?
The median is 67.8 × 100 mm, and 13% are two-layer designs.
What is the most popular open source board using the BQ29700?
By GitHub stars, Smart sensor battery pack by FeatureNAB, with 215 stars.
Can I simulate one of these boards using the BQ29700 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.