MIDI-Keypad
npsboy·MIDI-Keypad
About the MIDI-Keypad PCB
MIDI-Keypad is an open source ESP32 PCB design by npsboy, published on GitHub. It is a 2-layer board measuring 97 × 100 mm, with 20 components from 10 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 11 diodes, 4 switches, 1 IC, 1 transistor, 1 connector and 1 buzzer.
It belongs with the keyboards, audio and displays & leds designs in this gallery.
From the project
- Sliders removed. The encoder and the 3 Choc switches now share one top row, which frees a band above the keys. - A 5mm addressable RGB LED above each of the 7 touch keys. They chain after the tutorial's 3 NeoPixels, so they use no extra pins. - A passive buzzer (5V, 2048 Hz, 8
- Sliders removed. The encoder and the 3 Choc switches now share one top row, which frees a band above the keys. - A 5mm addressable RGB LED above each of the 7 touch keys. They chain after the tutorial's 3 NeoPixels, so they use no extra pins. - A passive buzzer (5V, 2048 Hz, 8 mm pin spacing), driven by a BC547 with a flyback diode. - Retro / chiptune pixel-art silkscreen on both sides.

Main components on the MIDI-Keypad
MIDI-Keypad bill of materials (BOM)
20 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 1 | Capacitive Touch Buttons | Capacitive Keys | J1 |
| 1 | Passive buzzer | Buzzer_12x9.5_P8.0mm | BZ1 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
| 7 | XL-504RGBC-WS2812B | LED_D5.0mm-4_XL-504RGBC-WS2812B | D4, D5, D6, D7, D8, D9, D10 |
| 1 | 1N4148 | D_DO-35_SOD27_P2.54mm_Vertical_CathodeUp | D11 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
MIDI-Keypad design files
The KiCad project lives in the npsboy/MIDI-Keypad repository on GitHub; these links point at the commit this page was built from.
- LayoutMIDI-Keypad.kicad_pcb
- SchematicMIDI-Keypad.kicad_sch
- BOMproduction/bom.csv
MIDI-Keypad: common questions
What microcontroller does the MIDI-Keypad use?
The MIDI-Keypad is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the MIDI-Keypad PCB?
The MIDI-Keypad measures 97 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MIDI-Keypad?
20 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MIDI-Keypad design files?
From the npsboy/MIDI-Keypad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MIDI-Keypad design in my own project?
The repository has no license, so all rights stay with npsboy. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MIDI-Keypad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k