Tasgdo
nrwiersma·tasgdo
About the Tasgdo PCB
Tasgdo is an open source ESP32 PCB design by nrwiersma, published on GitHub under the MIT license. It is a 4-layer board measuring 22 × 22.2 mm, with 40 components from 29 distinct parts.
Its main chip is the ESP32-C3FH4, from the ESP32 family. Other key parts include the LMR54410DBVR. By type, the board carries 14 capacitors, 12 resistors, 3 connectors, 3 diodes, 2 ICs and 2 inductors.
It belongs with the iot & wireless designs in this gallery.
From the project
TasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local Matter controller.
TasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local Matter controller.
Once Tasmota has been installed, the following template can be set:
Then run the following Commands in the Console:
detaches Switch2 and Switch3 from the relays, which are not set. To be used with GPIO4 and GPIO5.
See the Interactive BOM (provided by InteractiveHtmlBom) .

Main components on the Tasgdo
Tasgdo bill of materials (BOM)
40 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR54410DBVR Conv_LMR54410DBVR Texas Instruments | SOT-23-6 | U1 |
| 1 | ESP32-C3FH4 ESP32-C3 Espressif Systems | QFN-32-1EP | U3 |
| 1 | ECS-400-10-37B2-CKM-TR ECS | Oscillator_ECS_400-10-37B2-CKM-TR | Y2 |
| 1 | S4B-PH-K(LF)(SN) Conn_01x04 JST | Conn_JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1 |
| 1 | S3B-PH-K(LF)(SN) Conn_01x03 JST | Conn_JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0_16P Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J10 |
| 1 | RFECA3216060A1T Ant_RFECA3216060A1T_1206 Walsin Tech Corp | Ant_RFECA3216060A1T | AE1 |
| 1 | GAQY212GSX AQY212GSX SUPSiC | SSR_SUPSiC_GAQY212GSX | K1 |
| 1 | SKRPACE010 SW_Push ALPSALPINE | SW_PTS815SJM250SMTRLFS | SW1 |
| 1 | CDBQC0130L-HF D_Schottky_Small Comchip | D_0402_1005Metric | D1 |
| 1 | LTST-C191KRKT Red Lite-On | LED_0603_1608Metric | D4 |
| 1 | LTST-C295KGKRKT LED_Dual_AAKK Lite-On | LED_LiteOn_LTST-C295K_1.6x0.8mm | D5 |
| 1 | MLG1005S2N4BT000 2.4nH TDK | L_0402_1005Metric | L1 |
| 1 | PWCWAQ2012F-100KTT 10u PROD Tech | L_0805_2012Metric | L2 |
| 5 | CL05B104KO5NNNC 100n Samsung Electro-Mechanics | C_0402_1005Metric | C1, C3, C5, C29, C30 |
| 1 | CL05B103KA5NNNC 10n Samsung Electro-Mechanics | C_0402_1005Metric | C2 |
| 1 | CL05A106MP5NUNC 10u Samsung Electro-Mechanics | C_0402_1005Metric | C4 |
| 1 | CL21A106KBYQNNE 10u Samsung Electro-Mechanics | C_0805_2012Metric | C6 |
| 1 | CL21A226KPCLRNC 22u Samsung Electro-Mechanics | C_0805_2012Metric | C9 |
| 2 | CL05C120JB51PNC 12pF Samsung Electro-Mechanics | C_0402_1005Metric | C23, C24 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL05C2R7BB5NNNC 2p7 Samsung Electro-Mechanics | C_0402_1005Metric | C25 |
| 1 | CL05C2R4CB5NNNC 2p4 Samsung Electro-Mechanics | C_0402_1005Metric | C26 |
| 1 | CL05A105KP5NNNC 1u Samsung Electro-Mechanics | C_0402_1005Metric | C34 |
| 4 | RC0402FR-0710KL 10k YAGEO | R_0402_1005Metric | R1, R3, R7, R8 |
| 1 | RC0402FR-07220RL 220 YAGEO | R_0402_1005Metric | R2 |
| 3 | RK73H1ETTP1001F 1K KOA Speer Elec | R_0402_1005Metric | R4, R5, R6 |
| 1 | RC0402FR-0722K1L 22k1 YAGEO | R_0402_1005Metric | R9 |
| 1 | AC0402FR-0769K8L 69k8 YAGEO | R_0402_1005Metric | R10 |
| 2 | RC0402FR-075K1L 5k1 YAGEO | R_0402_1005Metric | R13, R14 |
Tasgdo design files
The KiCad project lives in the nrwiersma/tasgdo repository on GitHub; these links point at the commit this page was built from.
- LayoutTasGDO.kicad_pcb
- SchematicTasGDO.kicad_sch
Tasgdo: common questions
What microcontroller does the Tasgdo use?
The Tasgdo is built around the ESP32-C3FH4, from the ESP32 family.
How big is the Tasgdo PCB?
The Tasgdo measures 22 × 22.2 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Tasgdo?
40 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tasgdo design files?
From the nrwiersma/tasgdo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tasgdo design in my own project?
Yes, under the terms of its MIT license, which nrwiersma chose for the repository.
Can I test firmware for the Tasgdo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k