EaSyPower32
NZX37·EaSyPower32·kicad files/breadESP32.kicad_pcb
About the EaSyPower32 PCB
EaSyPower32 is an open source ESP32 PCB design by NZX37, published on GitHub. It is a 2-layer board measuring 38 × 87.3 mm, with 27 components from 14 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP2112K-3.3. By type, the board carries 10 capacitors, 6 diodes, 6 resistors, 2 ICs, 2 switches and 1 connector.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
ESP32 S3 dev kit with an (easy) place to slot in a TP4056 charger module(power) [woahh creative name]
EaSyPower32 is an ESP32-S3 development board with USB-C and a connection for a TP4056 charger module. It is designed to make battery-powered ESP32 projects easier to prototype.
- ESP32-S3-WROOM-1 module (N16R2) - USB-C connection - AP2112K 3.3 V regulator - Reset and boot buttons - Status LED and SK6812 RGB LED - Breakout pins for connecting a TP4056 charger module

Main components on the EaSyPower32
EaSyPower32 bill of materials (BOM)
27 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J1 |
| 2 | SW_Push | SW_SPST_B3S-1000 | SW1, SW2 |
| 1 | 1N5819WS | D_SOD-323_HandSoldering | D1 |
| 3 | D_TVS | D_SOD-323_HandSoldering | D2, D3, D4 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | SK6812 | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D6 |
| 3 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C13 |
| 3 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C11 |
| 4 | 0u1F | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C12 |
| 2 | 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 75R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7 |
EaSyPower32 design files
The KiCad project lives in the NZX37/EaSyPower32 repository on GitHub; these links point at the commit this page was built from.
EaSyPower32: common questions
What microcontroller does the EaSyPower32 use?
The EaSyPower32 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the EaSyPower32 PCB?
The EaSyPower32 measures 38 × 87.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EaSyPower32?
27 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the EaSyPower32 design files?
From the NZX37/EaSyPower32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EaSyPower32 design in my own project?
The repository has no license, so all rights stay with NZX37. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EaSyPower32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k