HardLabs

Oblique Palette 0.5

Oblique-Industry·Oblique-Easel·Oblique Palette 0.5.x PCB Files/Oblique Palette 0.5.4 PCB Main/Oblique Palette 0.5.4 PCB Main.kicad_pcb

Oblique Palette 0.5 PCB layout, top view — open source RP2040/RP2350 board by Oblique-Industry

About the Oblique Palette 0.5 PCB

Oblique Palette 0.5 is an open source RP2040/RP2350 PCB design by Oblique-Industry, published on GitHub. It is a 2-layer board measuring 235 × 110 mm, with 302 components from 24 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the CD4051B, MCP6004 and MCP4725xxx-xCH. By type, the board carries 140 resistors, 72 diodes, 40 connectors, 26 ICs and 16 capacitors.

From the project

Code, Electronics, and Industrial Design for the Oblique Easel Artmaschine Cyberdeck

Main components on the Oblique Palette 0.5

CD4051BPicoMCP6004MCP4725xxx-xCH

Oblique Palette 0.5 bill of materials (BOM)

302 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CD4051B
U1
1
Pico
U2
16
MCP6004
U3, U4, U5, U6, U7, U8, U9, U10 +8
8
MCP4725xxx-xCH
U11, U13, U15, U17, U19, U21, U23, U25
8
Conn_01x03_Male_Pin
J1, J3, J6, J8, J10, J12, J15, J18
16
Conn_01x03_Female_Pin
J16, J19, J22, J25, J28, J31, J34, J37 +8
16
AudioJack2_SwitchT
J17, J20, J23, J26, J29, J32, J35, J38 +8
8
R_Potentiometer_MountingPin
RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8
8
~
D1, D53, D57, D61, D65, D69, D73, D77
16
White
D2, D8, D14, D20, D26, D32, D38, D44 +8
16
Yellow
D3, D9, D15, D21, D27, D33, D39, D45 +8
16
1N4148
D4, D5, D10, D11, D16, D17, D22, D23 +8
16
Red
D6, D12, D18, D24, D30, D36, D42, D48 +8
8
1mF
C1, C18, C19, C20, C21, C22, C23, C24
8
1n
C9, C10, C11, C12, C13, C14, C15, C16
4
R33k
R1, R2, R9, R10
16
1K
R3, R11, R19, R27, R35, R43, R51, R59 +8
16
300k
R4, R12, R20, R28, R36, R44, R52, R60 +8
32
127R
R5, R7, R13, R15, R21, R23, R29, R31 +24
16
110K
R6, R14, R22, R30, R38, R46, R54, R62 +8
Show 4 more
QtyPartRefs
16
150K
R8, R16, R24, R32, R40, R48, R56, R64 +8
8
100R
R17, R18, R25, R26, R33, R34, R41, R42
16
100K
R68, R72, R79, R83, R90, R94, R101, R105 +8
16
200k
R112, R116, R123, R127, R134, R138, R145, R149 +8

Oblique Palette 0.5 design files

The KiCad project lives in the Oblique-Industry/Oblique-Easel repository on GitHub; these links point at the commit this page was built from.

Oblique Palette 0.5: common questions

What microcontroller does the Oblique Palette 0.5 use?

The Oblique Palette 0.5 is built around the Pico, from the RP2040/RP2350 family.

How big is the Oblique Palette 0.5 PCB?

The Oblique Palette 0.5 measures 235 × 110 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Oblique Palette 0.5?

302 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Oblique Palette 0.5 design files?

From the Oblique-Industry/Oblique-Easel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Oblique Palette 0.5 design in my own project?

The repository has no license, so all rights stay with Oblique-Industry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Oblique Palette 0.5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Oblique-Easel

Similar boards