13 open source boards using the MCP4725xxx-xCH

Real designs built with the MCP4725xxx-xCH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the MCP4725xxx-xCH

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MCP4725xxx-xCH connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a pull-up to 3.3V on 7 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • The SCL pin has a pull-up to 3.3V on 7 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 1 nF).
  • The A0 pin is tied to GND on 7 of 11 designs (5V on 3).
VOUTpin 1Connected to: Signal 91%
  • Series resistor on 36% · 100 kΩ (2), 1.56 kΩ (1), 10 kΩ (1)
VSSpin 2Connected to: GND 100%
VDDpin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 55% · 100 nF (6), 1 nF (1)
SDApin 4Connected to: The microcontroller 36%
  • Pull-up to 3.3V on 64% · 4.7 kΩ (3), 2.2 kΩ (3)
SCLpin 5Connected to: The microcontroller 36%
  • Pull-up to 3.3V on 64% · 4.7 kΩ (3), 2.2 kΩ (3)
A0pin 6Connected to: GND 64% · 5V 27%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oblique Palette 0.5 by Oblique-Industry, Magic-Tabmount by mgiesen, Ardampdacv1 by orri93 and Containment simple by UWCubeSat.

The MCP4725xxx-xCH in open source designs

The gallery holds 13 open source boards using the MCP4725xxx-xCH from 12 GitHub repositories; a typical one measures about 100 × 60.8 mm and carries around 57 components.

75% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.

The most starred is Oblique Palette 0.5 by Oblique-Industry.

Microcontrollers on boards using the MCP4725xxx-xCH

MCP4725xxx-xCH: common questions

Where can I find a MCP4725xxx-xCH reference design?

Each of the 13 boards on this page is a real design using the MCP4725xxx-xCH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the MCP4725xxx-xCH SDA pin?

The SDA pin has a pull-up to 3.3V on 7 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 11 open source designs using the MCP4725xxx-xCH.

What pull-up resistor is used on the MCP4725xxx-xCH SCL pin?

The SCL pin has a pull-up to 3.3V on 7 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 11 open source designs using the MCP4725xxx-xCH.

What decoupling capacitors do designs use on the MCP4725xxx-xCH VDD pin?

The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 1 nF). Counted from the KiCad layouts of 11 open source designs using the MCP4725xxx-xCH.

What parts are used alongside the MCP4725xxx-xCH?

The ADS1115IDGS, ADS1115IDGSR, AMS1117-3.3, CAT24C256 and CC6920SO-10A appear in the most repositories here.

Which microcontrollers do boards using the MCP4725xxx-xCH use?

Most are built on ESP32 (3), RP2040/RP2350 (2), NXP (1) and STM32 (1).

How big is a typical board using the MCP4725xxx-xCH?

The median is 100 × 60.8 mm, and 75% are two-layer designs.

What is the most popular open source board using the MCP4725xxx-xCH?

By GitHub stars, Oblique Palette 0.5 by Oblique-Industry, with 5 stars.

Can I simulate one of these boards using the MCP4725xxx-xCH before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part