Glance

OffshoreX·glance_AR_glasses·PCB-stuff/board1/glance-pcb.kicad_pcb

Glance PCB layout, top view — open source ESP32 board by OffshoreX

About the Glance PCB

Glance is an open source ESP32 PCB design by OffshoreX, published on GitHub. It is a 2-layer board measuring 46.3 × 37.3 mm, with 31 components from 24 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MCP73831-2-OT and AP2112K-3.3. By type, the board carries 10 resistors, 8 capacitors, 5 switches, 3 ICs, 3 connectors and 2 diodes.

It belongs with the iot & wireless, power & battery and sensors designs in this gallery.

From the project

GLANCE started as AR smart glasses and became a sensing platform for autofocal reading glasses. An outward-facing distance sensor measures how far away the object in front of you is. Two inward-facing infrared eye sensors estimate where your eyes are pointing. Together they estim

GLANCE started as AR smart glasses and became a sensing platform for autofocal reading glasses. An outward-facing distance sensor measures how far away the object in front of you is. Two inward-facing infrared eye sensors estimate where your eyes are pointing. Together they estimate the distance you are actually looking at, which is the signal a focus-tunable lens would need to adjust itself. The lens itself is out of scope for this project. This repo covers the electronics that do the sensing.

Glance, from the project README
From the project README

Main components on the Glance

Glance bill of materials (BOM)

31 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP73831-2-OT
U2
1
AP2112K-3.3
U3
1
ESP32-S3-WROOM-1
ESP32-C3-MINI-1
U4
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_01X02
Conn_01x02
J2
1
OLED
J3
1
SW_SPDT
SW1
2
SW_Push
SW2, SW5
1
RESET
SW6
1
BOOT
SW7
1
LED
D1
1
Debug LED
D2
1
100NF
100nF
C1
2
4.7UF
4.7uF
C2, C3
2
1UF
1uF
C4, C9
1
100NF
10uF
C6
1
1UF
100nF
C7
1
100NF
1uF
C8
1
330
R1
2
5.1K
5.1k
R2, R3
Show 4 more
QtyPartRefs
1
1k
R4
2
10K
10k
R5, R12
2
100K
100k
R8, R9
2
4.7K
10k
R10, R11

Glance design files

The KiCad project lives in the OffshoreX/glance_AR_glasses repository on GitHub; these links point at the commit this page was built from.

Glance: common questions

What microcontroller does the Glance use?

The Glance is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Glance PCB?

The Glance measures 46.3 × 37.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Glance?

31 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Glance design files?

From the OffshoreX/glance_AR_glasses repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Glance design in my own project?

The repository has no license, so all rights stay with OffshoreX. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Glance without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in glance_AR_glasses

Similar boards