HardLabs

Led tester

oguzhanbaser·GalvoScanner·Devreler/beacon_led/led_tester_v2/led_tester.kicad_pcb

Led tester PCB layout, top view — open source board by oguzhanbaser

About the Led tester PCB

Led tester is an open source PCB design by oguzhanbaser, published on GitHub. It is a 2-layer board measuring 40 × 41 mm, with 15 components from 3 distinct parts.

By type, the board carries 8 resistors, 4 diodes and 3 connectors.

It belongs with the robotics & motion designs in this gallery.

From the project

3. Üretilen parametreleri (örn. cameraparams.py) uygulama tarafında içe aktar. 4. Raspberry Pi için ayrı parametre gerekirse cameraparams_rpi.py referans alınır.

3. Üretilen parametreleri (örn. cameraparams.py) uygulama tarafında içe aktar. 4. Raspberry Pi için ayrı parametre gerekirse cameraparams_rpi.py referans alınır.

camera_model.xacro içindeki parametrelerle sanal kamera testleri yapılır.

Led tester bill of materials (BOM)

15 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
CONN_01X02_PIN
Conn_01x02_Pin
J1, J2, J3
4
SMLVN6RGB
D1, D2, D4, D7
8
R
R1, R2, R3, R4, R5, R6, R7, R8

Led tester design files

The KiCad project lives in the oguzhanbaser/GalvoScanner repository on GitHub; these links point at the commit this page was built from.

Led tester: common questions

How big is the Led tester PCB?

The Led tester measures 40 × 41 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Led tester?

15 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Led tester design files?

From the oguzhanbaser/GalvoScanner repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Led tester design in my own project?

The repository has no license, so all rights stay with oguzhanbaser. Use it as a reference, and ask the author before reusing the design.

More boards in GalvoScanner

Similar boards