HardLabs

Laser com v1

oguzhanbaser·GalvoScanner·Devreler/laser_com/laser_com_v1/laser_com_v1.kicad_pcb

Laser com v1 PCB layout, top view — open source board by oguzhanbaser

About the Laser com v1 PCB

Laser com v1 is an open source PCB design by oguzhanbaser, published on GitHub. It is a 2-layer board measuring 61 × 61.1 mm, with 69 components from 35 distinct parts.

Other key parts include the MAX4390, OPA695, LT1713, MAX4392 and MIC2605. By type, the board carries 27 resistors, 24 capacitors, 6 ICs, 4 diodes, 3 inductors and 2 connectors.

It belongs with the robotics & motion designs in this gallery.

From the project

3. Üretilen parametreleri (örn. cameraparams.py) uygulama tarafında içe aktar. 4. Raspberry Pi için ayrı parametre gerekirse cameraparams_rpi.py referans alınır.

3. Üretilen parametreleri (örn. cameraparams.py) uygulama tarafında içe aktar. 4. Raspberry Pi için ayrı parametre gerekirse cameraparams_rpi.py referans alınır.

camera_model.xacro içindeki parametrelerle sanal kamera testleri yapılır.

Main components on the Laser com v1

MAX4390OPA695LT1713MAX4392MIC2605L7805

Laser com v1 bill of materials (BOM)

69 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MAX4390
U1
1
OPA695
U2
1
LT1713
U3
1
MAX4392
U4
1
MIC2605
U5
1
L7805
U6
1
RJ45_SHIELDED
RJ45_Shielded
J1
1
Barrel_Jack_Switch
J2
1
Fuse
F1
1
D_LASER_1C2A
D_Laser_1C2A
LD1
1
R_Potentiometer
RV1
2
LED
D1, D3
1
D
D2
1
D_Photo
D4
3
10UH
10uH
L1, L2, L3
5
1UF
1uF
C1, C3, C8, C18, C20
8
100NF
100nF
C2, C7, C10, C13, C15, C17, C21, C22
1
2.2UF
2.2uF
C4
5
22NF
22nF
C5, C9, C19, C23, C24
3
10UF
10uF
C6, C11, C12
Show 15 more
QtyPartRefs
1
47UF
47uF
C14
1
C
C16
1
12.4K
R1
1
500R
R2
10
22K
R3, R4, R7, R8, R9, R11, R23, R24 +2
1
10K
10k
R5
2
10R
R6, R10
2
4K7
4k7
R12, R18
2
2K2
2k2
R13, R14
1
1k
R15
3
50R
R16, R21, R22
1
1K2
1k2
R17
1
47K
47k
R19
1
220R
R20
1
470K
470k
R25

Laser com v1 design files

The KiCad project lives in the oguzhanbaser/GalvoScanner repository on GitHub; these links point at the commit this page was built from.

Laser com v1: common questions

How big is the Laser com v1 PCB?

The Laser com v1 measures 61 × 61.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Laser com v1?

69 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Laser com v1 design files?

From the oguzhanbaser/GalvoScanner repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Laser com v1 design in my own project?

The repository has no license, so all rights stay with oguzhanbaser. Use it as a reference, and ask the author before reusing the design.

More boards in GalvoScanner

Similar boards