2026 higaeri

old-bridge·2026_higaeri·boards/higaeri.kicad_pcb

2026 higaeri PCB layout, top view — open source ESP32 board by old-bridge

About the 2026 higaeri PCB

2026 higaeri is an open source ESP32 PCB design by old-bridge, published on GitHub. It is a 2-layer board measuring 111.5 × 94.5 mm, with 89 components from 42 distinct parts.

Its main chip is the MOUDLE-SEEEDUINO-XIAO-ESP32C3_TFT, from the ESP32 family. Other key parts include the MAX3485, MOUDLE-SEEEDUINO-XIAO-ESP32C3_AIRDATA, MOUDLE-SEEEDUINO-XIAO-ESP32C3_LOGGER, DS3231MZ and TJ393. By type, the board carries 44 resistors, 15 connectors, 11 ICs, 5 diodes, 3 capacitors and 2 transistors.

Main components on the 2026 higaeri

2026 higaeri bill of materials (BOM)

89 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3_TFT
U1
3
MAX3485
U2, U4, U8
2
MOUDLE-SEEEDUINO-XIAO-ESP32C3_AIRDATA
MOUDLE-SEEEDUINO-XIAO-ESP32C3_airdata
U3, U9
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3_LOGGER
MOUDLE-SEEEDUINO-XIAO-ESP32C3_logger
U5
1
DS3231MZ
U6
2
TJ393
U7, U10
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3_POT
MOUDLE-SEEEDUINO-XIAO-ESP32C3_pot
U11
2
NPN
Q1, Q2
1
5051104096
J1
1
Micro_SD_Card
J2
1
URM37
J3
1
servo
J4
1
RS485_TFT
J5
1
encoder_direct
J6
1
RS485_LOGGER_2
RS485_logger_2
J7
1
RS485_LOGGER
RS485_logger
J8
1
BNO085
J9
1
pot
J10
2
RE12A
J11, J14
1
RS485_AIRDATA
RS485_airdata
J12
Show 22 more
QtyPartRefs
1
Conn_01x03 speaker
J13
1
encoder_direct
J15
1
AoS
AS5600-1
1
AoA
AS5600-2
1
MS621
BT2
4
Conn_01x02
Batt1, Batt2, Batt4, Batt5
1
Adafruit DPS310
DPS311
1
SW_DIP_X01
SW_DIP_x01
SW1
4
LED
D1, D2, D3, D4
1
D
D5
1
0.1UF
0.1uF
C1
2
47UF
47uF
C2, C3
16
10K
10k
R1, R2, R3, R9, R13, R18, R19, R21 +8
1
680
R4
2
120
R5, R32
8
2k
R6, R7, R8, R11, R12, R14, R25, R27
2
3.3K
3.3k
R10, R20
4
100
R15, R22, R23, R31
2
2K2
2k2
R16, R43
1
2
R17
6
220K
220k
R24, R28, R33, R34, R35, R36
2
150
R26, R39

2026 higaeri design files

The KiCad project lives in the old-bridge/2026_higaeri repository on GitHub; these links point at the commit this page was built from.

2026 higaeri: common questions

What microcontroller does the 2026 higaeri use?

The 2026 higaeri is built around the MOUDLE-SEEEDUINO-XIAO-ESP32C3_TFT, from the ESP32 family.

How big is the 2026 higaeri PCB?

The 2026 higaeri measures 111.5 × 94.5 mm, has 2 copper layers and is 1 mm thick.

How many components are on the 2026 higaeri?

89 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 2026 higaeri design files?

From the old-bridge/2026_higaeri repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 2026 higaeri design in my own project?

The repository has no license, so all rights stay with old-bridge. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 2026 higaeri without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards