Pre-26thDenso

old-bridge·pre-26thDenso·Kicad/boards/26proto.kicad_pcb

Pre-26thDenso PCB layout, top view — open source ESP32 board by old-bridge

About the Pre-26thDenso PCB

Pre-26thDenso is an open source ESP32 PCB design by old-bridge, published on GitHub. It is a 2-layer board measuring 98.8 × 94 mm, with 69 components from 42 distinct parts.

Its main chip is the MOUDLE-SEEEDUINO-XIAO-ESP32C3_TFT, from the ESP32 family. Other key parts include the MAX3485, MOUDLE-SEEEDUINO-XIAO-ESP32C3_LOGGER, DS3231MZ, MOUDLE-SEEEDUINO-XIAO-ESP32C3_AIRDATA and MOUDLE-SEEEDUINO-XIAO-ESP32C3_POT. By type, the board carries 32 resistors, 13 connectors, 8 ICs, 4 diodes, 3 capacitors and 1 transistor.

From the project

for prototyping 26denso

Main components on the Pre-26thDenso

Pre-26thDenso bill of materials (BOM)

69 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3_TFT
U1
3
MAX3485
U2, U4, U8
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3_LOGGER
MOUDLE-SEEEDUINO-XIAO-ESP32C3_logger
U5
1
DS3231MZ
U6
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3_AIRDATA
MOUDLE-SEEEDUINO-XIAO-ESP32C3_airdata
U9
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3_POT
MOUDLE-SEEEDUINO-XIAO-ESP32C3_pot
U11
1
NPN
Q3
1
5051104096
J1
1
Micro_SD_Card
J2
1
URM37
J3
1
Conn_01x03 servo
J4
1
RS485_TFT
J5
1
Conn_01x03 encoder_direct
J6
1
RS485_LOGGER_2
RS485_logger_2
J7
1
RS485_LOGGER
RS485_logger
J8
1
BNO085
J9
1
CONN_01X04
Conn_01x04
J10
1
RE12A
J11
1
RS485_AIRDATA
RS485_airdata
J12
1
Conn_01x03 speaker
J13
Show 22 more
QtyPartRefs
1
AoS
AS5602
1
AoA
AS5603
1
MS621
BT2
3
Conn_01x02
Batt1, Batt2, Batt4
1
Adafruit DPS310
DPS311
1
SW_DIP_X01
SW_DIP_x01
SW1
3
LED
D1, D2, D4
1
D
D5
1
0.1UF
0.1uF
C1
2
47UF
47uF
C2, C3
7
10K
10k
R1, R2, R3, R9, R13, R18, R30
1
680
R4
2
120
R5, R32
6
2k
R6, R7, R8, R11, R12, R14
2
3.3K
3.3k
R10, R20
1
2
R17
3
100
R22, R23, R31
6
220K
220k
R24, R28, R33, R34, R35, R36
1
20K
20k
R25
1
330
R26
1
3k
R27
1
100K
100k
R29

Pre-26thDenso design files

The KiCad project lives in the old-bridge/pre-26thDenso repository on GitHub; these links point at the commit this page was built from.

Pre-26thDenso: common questions

What microcontroller does the Pre-26thDenso use?

The Pre-26thDenso is built around the MOUDLE-SEEEDUINO-XIAO-ESP32C3_TFT, from the ESP32 family.

How big is the Pre-26thDenso PCB?

The Pre-26thDenso measures 98.8 × 94 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Pre-26thDenso?

69 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pre-26thDenso design files?

From the old-bridge/pre-26thDenso repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pre-26thDenso design in my own project?

The repository has no license, so all rights stay with old-bridge. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pre-26thDenso without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards