HardLabs

Softswitcher hdmi v1

oldsheeep3·TheHack·softswitcher_hdmi_v1/softswitcher_hdmi_v1.kicad_pcb

Softswitcher hdmi v1 PCB layout, top view — open source Raspberry Pi board by oldsheeep3
Simulate this board

About the Softswitcher hdmi v1 PCB

Softswitcher hdmi v1 is an open source Raspberry Pi PCB design by oldsheeep3, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 78 × 78 mm, with 29 components from 8 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the XC6206P332MR-G. By type, the board carries 16 diodes, 8 switches, 2 resistors, 1 IC, 1 module and 1 connector.

It belongs with the iot & wireless designs in this gallery.

From the project

HybridSwitcher — ハイブリッドIP映像スイッチャー（開発用リポジトリ）

既存機材（ATEM Mini）と自作ハードウェア（自作スイッチングモジュール群 + Pico 2W）、 ネットワーク技術（SRT / NDI / WebAPI）を融合した、次世代のハイブリッドIP映像スイッチャーシステム。

PC上に常駐する制御アプリを「脳」とし、複数プロトコル（UVC / NDI / SRT）の映像入力・PiP合成・ 仮想カメラ出力・タリー送出・外部機材（ATEM）の遠隔制御を一元化する。DIYでありながらプロ用 スイッチャーに匹敵する多人数オペレーション（メイン/サブ分業）と拡張性を目指す。

clone しただけの状態では、次の理由で初回ビルドが必ず落ちる。setup.sh がこれを一括で潰す。

未解決の問題が残ると終了コード 1 で終わるので、CI からそのまま呼べる（./setup.sh --ci）。

Main components on the Softswitcher hdmi v1

XC6206P332MR-GRaspberryPi_Pico_W

Softswitcher hdmi v1 bill of materials (BOM)

29 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC6206P332MR-G
CH224K
U1
1
RaspberryPi_Pico_W
A1
1
CONN_01X07_PIN
USB_C_Receptacle_USB2.0_14P
J1
8
CherryMX
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
8
1N4148W
D1, D2, D5, D6, D9, D10, D13, D14
8
SK6812MINI-E
D3, D4, D7, D8, D11, D12, D15, D16
1
1k
R1
1
10k
R2

Softswitcher hdmi v1 design files

The KiCad project lives in the oldsheeep3/TheHack repository on GitHub; these links point at the commit this page was built from.

Softswitcher hdmi v1: common questions

What microcontroller does the Softswitcher hdmi v1 use?

The Softswitcher hdmi v1 is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the Softswitcher hdmi v1 PCB?

The Softswitcher hdmi v1 measures 78 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Softswitcher hdmi v1?

29 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Softswitcher hdmi v1 design files?

From the oldsheeep3/TheHack repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Softswitcher hdmi v1 design in my own project?

Yes, under the terms of its GPL-2.0 license, which oldsheeep3 chose for the repository.

Can I test firmware for the Softswitcher hdmi v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in TheHack

Similar boards