Esp32-clima

Ontos-2021·esp32-clima·hardware/esp32_clima.kicad_pcb

Esp32-clima PCB layout, top view — open source ESP32 board by Ontos-2021

About the Esp32-clima PCB

Esp32-clima is an open source ESP32 PCB design by Ontos-2021, published on GitHub. It is a 2-layer board measuring 80 × 60 mm, with 30 components from 20 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3, CP2102N and LM2596S-5.0. By type, the board carries 11 capacitors, 6 resistors, 4 ICs, 4 connectors, 2 switches and 1 LED.

It belongs with the iot & wireless designs in this gallery.

From the project

Estación meteorológica local con ESP32-WROOM-32, BMP180 y DHT22.

Estación meteorológica local con ESP32-WROOM-32, BMP180 y DHT22.

PCB de doble cara 80×60 mm, diseñada en KiCad 9.

- Schematic: hardware/esp32clima.kicadsch - Layout: hardware/esp32clima.kicadpcb - Fabricación: hardware/fabrication/ (Gerbers, BOM, positions, ZIP para PCBWay)

Crea un punto de acceso WiFi ESP32-CLIMA (192.168.4.1) con interfaz web.

- Adafruit BMP085 Library - DHT sensor library - Adafruit Unified Sensor

Main components on the Esp32-clima

Esp32-clima bill of materials (BOM)

30 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
AMS1117-3.3
U2
1
CP2102N
U3
1
LM2596S-5.0
U4
1
Barrel_Jack_12V
J1
1
BMP180_Header
J2
1
DHT22_Header
J3
1
USB-C_Receptacle
J4
1
EN_RESET
SW1
1
BOOT
SW2
1
LED
LED1
1
SS34
D1
1
33uH
L1
5
100nF
C1, C3, C7, C9, C11
4
10uF
C2, C5, C6, C8
1
220uF
C4
1
1uF
C10
2
4.7k
R1, R2
3
10k
R3, R5, R6
1
330
R4

Esp32-clima design files

The KiCad project lives in the Ontos-2021/esp32-clima repository on GitHub; these links point at the commit this page was built from.

Esp32-clima: common questions

What microcontroller does the Esp32-clima use?

The Esp32-clima is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Esp32-clima PCB?

The Esp32-clima measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32-clima?

30 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32-clima design files?

From the Ontos-2021/esp32-clima repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32-clima design in my own project?

The repository has no license, so all rights stay with Ontos-2021. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-clima without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards