TractorKit-Navis-Board
open-agri·TractorKit-Navis-Board
About the TractorKit-Navis-Board
TractorKit-Navis-Board is an open source ESP32 PCB design by open-agri, published on GitHub. It is a 2-layer board measuring 76.8 × 38.1 mm, with 20 components from 18 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3 and ACS711xLCTR-12AB. By type, the board carries 7 capacitors, 5 connectors, 4 resistors, 3 ICs and 1 diode.
It belongs with the rf & radio designs in this gallery.
From the project
GPS add-on board
Main components on the TractorKit-Navis-Board
TractorKit-Navis-Board bill of materials (BOM)
20 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ACS711xLCTR-12AB | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U3 |
| 1 | POWER | TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J1 |
| 1 | GPS_I2C | TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J2 |
| 1 | GPS_UART | TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J3 |
| 1 | GPS_A | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | GPS_B | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 100u | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 1u | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 2 | 100n | C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C7 |
| 1 | 2.2u | C_Disc_D7.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 220u | CP_Radial_D10.0mm_P5.00mm | C5 |
| 1 | C | C_Disc_D4.7mm_W2.5mm_P5.00mm | C6 |
| 2 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R3 |
| 1 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
TractorKit-Navis-Board design files
The KiCad project lives in the open-agri/TractorKit-Navis-Board repository on GitHub; these links point at the commit this page was built from.
TractorKit-Navis-Board: common questions
What microcontroller does the TractorKit-Navis-Board use?
The TractorKit-Navis-Board is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the TractorKit-Navis-Board?
The TractorKit-Navis-Board measures 76.8 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TractorKit-Navis-Board?
20 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the TractorKit-Navis-Board design files?
From the open-agri/TractorKit-Navis-Board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TractorKit-Navis-Board design in my own project?
The repository has no license, so all rights stay with open-agri. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TractorKit-Navis-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k