9 open source boards using the ACS711xLCTR-12AB

Real designs built with the ACS711xLCTR-12AB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the ACS711xLCTR-12AB

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ACS711xLCTR-12AB connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF.
  • The IP- pins is tied to 12V on 63% of them (GND on 4, a signal on 2).
  • The FAULT pin is left unconnected on 5 of 8 designs (a signal on 3).
IP+pin 1, 2Connected to: A connector 38%
  • Series resistor on 38% · 10 kΩ (4), 100 kΩ (2)
IP-pin 3, 4Connected to: 12V 63% · GND 25%
GNDpin 5Connected to: GND 100%
FAULTpin 6Connected to: Not connected 63% · a signal 38%
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 75% · 100 nF (6)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power control pcb by HacklabJKL, PowerDistributionBoard by Anteater-Electric-Racing, TractorKit-Commander-Board by open-agri and TractorKit-EngineSense-Board by open-agri.

The ACS711xLCTR-12AB in open source designs

The gallery holds 9 open source boards using the ACS711xLCTR-12AB from 8 GitHub repositories; a typical one measures about 87 × 70 mm and carries around 35 components.

100% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.

The most starred is Power control pcb by HacklabJKL.

Parts used alongside the ACS711xLCTR-12AB

Microcontrollers on boards using the ACS711xLCTR-12AB

What boards using the ACS711xLCTR-12AB are built for

ACS711xLCTR-12AB: common questions

Where can I find a ACS711xLCTR-12AB reference design?

Each of the 9 boards on this page is a real design using the ACS711xLCTR-12AB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ACS711xLCTR-12AB VCC pin?

The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the ACS711xLCTR-12AB.

How is the ACS711xLCTR-12AB IP- pin connected?

The IP- pins is tied to 12V on 63% of them (GND on 4, a signal on 2). Counted from the KiCad layouts of 8 open source designs using the ACS711xLCTR-12AB.

How is the ACS711xLCTR-12AB FAULT pin connected?

The FAULT pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the ACS711xLCTR-12AB.

What parts are used alongside the ACS711xLCTR-12AB?

The AMS1117-3.3, ESP32-WROOM-32, STM32F303K8Tx and TCAN332 appear in the most repositories here.

Which microcontrollers do boards using the ACS711xLCTR-12AB use?

Most are built on ESP32 (5) and STM32 (2).

How big is a typical board using the ACS711xLCTR-12AB?

The median is 87 × 70 mm, and 100% are two-layer designs.

What is the most popular open source board using the ACS711xLCTR-12AB?

By GitHub stars, Power control pcb by HacklabJKL, with 6 stars.

Can I simulate one of these boards using the ACS711xLCTR-12AB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part