Output.Panel
open-agri·TractorKit-Panel-Full·Prod/output.Panel.kicad_pcb
About the Output.Panel PCB
Output.Panel is an open source ESP32 PCB design by open-agri, published on GitHub. It is a 2-layer board measuring 243 × 114 mm, with 35 components from 25 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3 and ACS711xLCTR-12AB. By type, the board carries 13 resistors, 9 capacitors, 5 connectors, 3 ICs, 3 switches and 1 module.
From the project
A complete PCB panel for TractorKit devices.
Main components on the Output.Panel
Output.Panel bill of materials (BOM)
35 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ACS711xLCTR-12AB | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U3 |
| 1 | 3.5_TFT_SPI_480_320 | 3.5_TFT_SPI_480_320 | M1 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | EXPAND | PinSocket_1x05_P2.54mm_Horizontal | J2 |
| 1 | ADC2 | TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J3 |
| 1 | UART | TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J4 |
| 1 | I2C | TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J5 |
| 1 | BUTTON_BACK | SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | BUTTON_ENTER | SW_PUSH_6mm_H4.3mm | SW2 |
| 1 | Rotary_Encoder | RotaryEncoder_Alps_EC16B04 | SW3 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 100u | CP_Radial_D10.0mm_P5.00mm | C1 |
| 2 | 1u | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2, C3 |
| 3 | 100n | C_Disc_D4.7mm_W2.5mm_P5.00mm | C4, C7, C9 |
| 1 | 2.2u | C_Disc_D7.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 220u | CP_Radial_D10.0mm_P5.00mm | C6 |
| 1 | C | C_Disc_D4.7mm_W2.5mm_P5.00mm | C8 |
| 1 | LDR | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 3 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R8 |
| 4 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10, R11, R12, R13 |
| 1 | R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
Output.Panel design files
The KiCad project lives in the open-agri/TractorKit-Panel-Full repository on GitHub; these links point at the commit this page was built from.
Output.Panel: common questions
What microcontroller does the Output.Panel use?
The Output.Panel is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Output.Panel PCB?
The Output.Panel measures 243 × 114 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Output.Panel?
35 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Output.Panel design files?
From the open-agri/TractorKit-Panel-Full repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Output.Panel design in my own project?
The repository has no license, so all rights stay with open-agri. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Output.Panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in TractorKit-Panel-Full
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k