HardLabs

AG-GO-LED

Open-Air-Foundation·pcb-go·PCB/led-touch/led-touch.kicad_pcb

AG-GO-LED PCB layout, top view — open source board by Open-Air-Foundation

About the AG-GO-LED PCB

AG-GO-LED is an open source PCB design by Open-Air-Foundation, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 59.1 × 47.8 mm, with 25 components from 14 distinct parts.

Other key parts include the CAP1203-1-AC3 and LP5036. By type, the board carries 12 LEDs, 4 capacitors, 4 resistors, 2 ICs, 1 connector and 1 transformer.

It belongs with the power & battery, sensors and rf & radio designs in this gallery.

From the project

AirGradient GO is a handheld air quality monitor. It measures particulate matter (Sensirion SPS30), CO₂ (Senseair S12), VOC/NOx (SGP41), temperature and humidity (SHT4x), and barometric pressure (DPS368), with an accelerometer (LIS2DH12) for motion detection and a GPS receiver (T

AirGradient GO is a handheld air quality monitor. It measures particulate matter (Sensirion SPS30), CO₂ (Senseair S12), VOC/NOx (SGP41), temperature and humidity (SHT4x), and barometric pressure (DPS368), with an accelerometer (LIS2DH12) for motion detection and a GPS receiver (TAU1113) for location. Readings are shown on a 2.13″ black-and-white e-paper display with RGB LED indicators and capacitive touch controls. The device runs on a 505060 Li-Po pouch cell charged over USB-C.

Main components on the AG-GO-LED

CAP1203-1-AC3LP5036

AG-GO-LED bill of materials (BOM)

25 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CAP1203-1-AC3
CAP1203-1-AC3-TR
U1
1
LP5036
U2
1
C136657
SM05B-SRSS-TB (LF)(SN)
CN1
1
C2858296
0.5-6PQFHY-H1.0 119
FPC1
1
touch-left
T1
10
TJ-S1608SW6TDSLCCYRGB-A5
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +2
2
99-213UMC/3640661/TR8-T
LED25, LED26
1
22UF/25V
22uF/25V
C1
2
0.1UF/16V
0.1uF/16V
C2, C3
1
1UF/50V
1uF/50V
C4
1
5.1K
R1
1
100K
R2
1
RC0402FR-070RL
R3
1
RC0402FR-070RL
R4

AG-GO-LED design files

The KiCad project lives in the Open-Air-Foundation/pcb-go repository on GitHub; these links point at the commit this page was built from.

AG-GO-LED: common questions

How big is the AG-GO-LED PCB?

The AG-GO-LED measures 59.1 × 47.8 mm, has 2 copper layers and is 1 mm thick.

How many components are on the AG-GO-LED?

25 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AG-GO-LED design files?

From the Open-Air-Foundation/pcb-go repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AG-GO-LED design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which Open-Air-Foundation chose for the repository.

More boards in pcb-go

Similar boards