HardLabs

BaseBoard

open-headset-interconnect-standard·radio-adapter·BaseBoard/BaseBoard.kicad_pcb

BaseBoard PCB layout, top view — open source board by open-headset-interconnect-standard

About the BaseBoard PCB

BaseBoard is an open source PCB design by open-headset-interconnect-standard, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 74.3 × 30.5 mm, with 35 components from 17 distinct parts.

By type, the board carries 4 connectors, 4 resistors and 2 capacitors.

It belongs with the rf & radio and audio designs in this gallery.

From the project

An open-source OHIS Radio Adapter.

As of 2024-07-17, this is a Work In Progress.

1. Design a set of circuits that can be used to build OHIS compliant radio adapters. 2. Designs should be as simple as possible, but no simpler. 3. When laying out boards, keep as many parts through-hole as possible for ease of assembly. 4. There are two types of designs here: 1. General: Has all the circuits required to work with any radio, that needs to be configured. 2. Radio Specific: Trades Configurability for Simplicity. Make a simpler device for a specific radio.

BaseBoard bill of materials (BOM)

35 components, 17 distinct parts.

QtyPartRefs
1
RJHSE-5381
OHIS RJ45
Amphenol
J1
1
Radio Board
J2
1
.1" 3x40 right angle 2.54mm Pin Header
Dynamic/Electret
Generic
J3
1
.1" 3x40 right angle 2.54mm Pin Header
Speaker Input Config
Generic
J6
4
M3 6mm SS screw
Generic
BOM1, BOM9, BOM13, BOM17
1
Top Board
Board Fab
BOM2
4
M3 14mm brass standoff
Generic
BOM3, BOM10, BOM14, BOM18
1
Main Board
Board Fab
BOM4
1
Bottom Board
Board Fab
BOM5
4
M3 10mm SS screw
Generic
BOM6, BOM8, BOM12, BOM16
4
M3 3mm ABS standoff
Generic
BOM7, BOM11, BOM15, BOM19
5
.1" Pin Jumper
.1" Jumper
Generic
BOM20, BOM21, BOM22, BOM23, BOM24
1
N6-S25T0C-102
1k
Piher
RV2
2
FG28X5R1E106MRT06
10uF
TDK
C1, C2
1
CFR-12JT-52-1K
1k
YAGEO
R1
1
CFR-12JB-52-6K2
6.2k
YAGEO
R4
2
CFR-12JB-52-100R
100R
YAGEO
R6, R8

BaseBoard design files

The KiCad project lives in the open-headset-interconnect-standard/radio-adapter repository on GitHub; these links point at the commit this page was built from.

BaseBoard: common questions

How big is the BaseBoard PCB?

The BaseBoard measures 74.3 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BaseBoard?

35 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the BaseBoard design files?

From the open-headset-interconnect-standard/radio-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BaseBoard design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which open-headset-interconnect-standard chose for the repository.

More boards in radio-adapter

Similar boards