HardLabs

Yaesu-6p6c

open-headset-interconnect-standard·radio-adapter·Yaesu-6p6c/Yaesu-6p6c.kicad_pcb

Yaesu-6p6c PCB layout, top view — open source board by open-headset-interconnect-standard
Simulate this board

About the Yaesu-6p6c PCB

Yaesu-6p6c is an open source PCB design by open-headset-interconnect-standard, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 27.3 × 30.5 mm, with 3 components from 3 distinct parts.

It belongs with the rf & radio and audio designs in this gallery.

From the project

An open-source OHIS Radio Adapter.

As of 2024-07-17, this is a Work In Progress.

1. Design a set of circuits that can be used to build OHIS compliant radio adapters. 2. Designs should be as simple as possible, but no simpler. 3. When laying out boards, keep as many parts through-hole as possible for ease of assembly. 4. There are two types of designs here: 1. General: Has all the circuits required to work with any radio, that needs to be configured. 2. Radio Specific: Trades Configurability for Simplicity. Make a simpler device for a specific radio.

Yaesu-6p6c bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
Mic Input
J1
1
Base Board
J2
1
Headphone/Speaker Input
J3

Yaesu-6p6c design files

The KiCad project lives in the open-headset-interconnect-standard/radio-adapter repository on GitHub; these links point at the commit this page was built from.

Yaesu-6p6c: common questions

How big is the Yaesu-6p6c PCB?

The Yaesu-6p6c measures 27.3 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Yaesu-6p6c?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Yaesu-6p6c design files?

From the open-headset-interconnect-standard/radio-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Yaesu-6p6c design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which open-headset-interconnect-standard chose for the repository.

More boards in radio-adapter

Similar boards