Device gateway

opensimgear·device-gateway·electronics/boards/gateway/0.1.0/gateway.kicad_pcb

Device gateway PCB layout, top view — open source STM32 board by opensimgear

About the Device gateway PCB

Device gateway is an open source STM32 PCB design by opensimgear, published on GitHub under the Custom license license. It is a 4-layer board measuring 65 × 55 mm, with 41 components from 27 distinct parts.

Its main chip is the STM32G0B1CBT6, from the STM32 family. Other key parts include the USBLC6-2SC6, TCAN3413D, R-78E5.0-0.5, TLV75533PDBVR and LM66100DCKR. By type, the board carries 12 capacitors, 8 resistors, 7 ICs, 6 connectors, 5 diodes and 2 fuses.

It belongs with the power & battery designs in this gallery.

From the project

Work-in-progress STM32 Cyphal/CAN-to-USB gateway with automatic input/output enrollment, ordered HID controllers, guarded configuration/leased action/event routing and native/Pico debug simulation.

This project is heavily under development and is not ready for use. Use it entirely at your own risk. To the fullest extent permitted by applicable law, the authors and contributors disclaim all liability for any damage, loss, or other issues arising from its use.

Open gateway.kicadpro in KiCad 10. This revision develops the gateway around the reviewed STM32G0B1 starter core, adding protected 12 V injection and two physical 4P4C** modular CAN/power sockets. The board is a prototype; no assembly has been measured or fabricated. Validation records actual static results and validation limits.…

Main components on the Device gateway

Device gateway bill of materials (BOM)

41 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G0B1CBT6
U1
1
USBLC6-2SC6
U2
1
TCAN3413D
U3
1
R-78E5.0-0.5
U4
1
TLV75533PDBVR
U5
2
LM66100DCKR
U6, U7
1
USB4105-GF-A
USB-C DEVICE
J1
2
5301-4P4C
4P4C POWERED CAN
J2, J3
1
TSW-105-07-L-S
SWD / 3V3 REFERENCE ONLY
J4
1
PJ-102AH
12V DC CENTER + / 5.5x2.1
J5
1
TSW-103-07-L-S
CAN TEST / END TERMINATION
J6
1
1206L020/30YR
0.20A hold / 30V
F1
1
1206L035/30WR
0.35A hold / 30V
F2
1
B3F-1002-G
RESET
SW2
2
SS14-E3/61T
SS14
D1, D6
1
AP2012SGC
GREEN
D4
1
SMF15A-E3-08
D5
1
SMBJ15A-E3/52
D7
7
C0805C104K3RACTU
100nF 25V X7R
C1, C6, C8, C9, C10, C11, C13
1
GRM32ER71H106KA12L
10uF 50V X7R
C2
Show 7 more
QtyPartRefs
3
C2012X7R1E105K125AB
1uF 25V X7R
C3, C4, C7
1
C2012X7R1E225K125AB
2.2uF 25V X7R
C5
2
RC0805FR-075K1L
5.1k 1%
R1, R2
1
RC0805FR-0710KL
10k 1%
R3
1
RC0805FR-0715KL
15k 1%
R4
3
RC0805FR-0710KL
10k
R5, R6, R7
1
RC0805FR-071KL
1k
R8

Device gateway design files

The KiCad project lives in the opensimgear/device-gateway repository on GitHub; these links point at the commit this page was built from.

Device gateway: common questions

What microcontroller does the Device gateway use?

The Device gateway is built around the STM32G0B1CBT6, from the STM32 family.

How big is the Device gateway PCB?

The Device gateway measures 65 × 55 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Device gateway?

41 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Device gateway design files?

From the opensimgear/device-gateway repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Device gateway design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Device gateway without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards