2 open source boards using the TCAN3413D

Real designs built with the TCAN3413D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TCAN3413D in open source designs

The gallery holds 2 open source boards using the TCAN3413D from 2 GitHub repositories; a typical one measures about 75 × 65 mm and carries around 74 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is OpenSimGear generic STM32G0B1 module by opensimgear.

Microcontrollers on boards using the TCAN3413D

What boards using the TCAN3413D are built for

TCAN3413D: common questions

Where can I find a TCAN3413D reference design?

Each of the 2 boards on this page is a real design using the TCAN3413D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TCAN3413D?

The LM66100DCKR, R-78E5.0-0.5, STM32G0B1CBT6, TLV75533PDBVR and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the TCAN3413D use?

Most are built on STM32 (2).

How big is a typical board using the TCAN3413D?

The median is 75 × 65 mm, and 0% are two-layer designs.

What is the most popular open source board using the TCAN3413D?

By GitHub stars, OpenSimGear generic STM32G0B1 module by opensimgear, with 0 stars.

Can I simulate one of these boards using the TCAN3413D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part