18 open source boards using the TS5A21366DCUR

Real designs built with the TS5A21366DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the TS5A21366DCUR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TS5A21366DCUR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_8 pin has a capacitor to GND on 11 of 11 designs, most often 100 nF (then 1 µF).
  • The NO1_1 pin has a series resistor on 9 of 11 designs, most often 100 Ω (then 120 Ω).
  • The NO2_5 pin has a series resistor on 9 of 11 designs, most often 100 Ω (then 1 kΩ).
  • The VCC_8 pin has a series resistor on 8 of 11 designs, most often 4.7 kΩ (then 2.7 kΩ).
NO1_1pin 1Connected to: Signal 100%
  • Series resistor on 82% · 100 Ω (6), 120 Ω (2), 1 kΩ (1)
IN2_3pin 3Connected to: MAX7310ATE+ 45%, MAX7310ATE 27%
  • Resistor to GND on 36% · 10 kΩ (4)
GND_4pin 4Connected to: GND 100%
NO2_5pin 5Connected to: Signal 100%
  • Series resistor on 82% · 100 Ω (6), 1 kΩ (1), 120 Ω (1)
IN1_7pin 7Connected to: MAX7310ATE+ 45%, MAX7310ATE 27%
  • Resistor to GND on 36% · 10 kΩ (4)
VCC_8pin 8Connected to: MAX4211FETE 55%, MAX7310ATE+ 45%, MAX7310ATE 27% · 3.3V 18%
  • Capacitor to GND on 100% · 100 nF (12), 1 µF (7), 4.7 µF (1)
  • Series resistor on 73% · 4.7 kΩ (5), 2.7 kΩ (2), 1 MΩ (2)
  • Resistor to GND on 64% · 10 kΩ (7)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OreSat Star Tracker Card by oresat, OreSat GPS Card by oresat, OreSat Battery Card by oresat and Oresat adcs card by oresat.

The TS5A21366DCUR in open source designs

The gallery holds 18 open source boards using the TS5A21366DCUR from 11 GitHub repositories; a typical one measures about 99.8 × 94.6 mm and carries around 169 components.

89% use four copper layers or more, and 33% carry an open source license.

The most starred is OreSat Star Tracker Card by oresat.

Microcontrollers on boards using the TS5A21366DCUR

What boards using the TS5A21366DCUR are built for

TS5A21366DCUR: common questions

Where can I find a TS5A21366DCUR reference design?

Each of the 18 boards on this page is a real design using the TS5A21366DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TS5A21366DCUR VCC_8 pin connected?

The VCC_8 pin has a capacitor to GND on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the TS5A21366DCUR.

What resistor goes on the TS5A21366DCUR NO1_1 pin?

The NO1_1 pin has a series resistor on 9 of 11 designs, most often 100 Ω (then 120 Ω). Counted from the KiCad layouts of 11 open source designs using the TS5A21366DCUR.

What resistor goes on the TS5A21366DCUR NO2_5 pin?

The NO2_5 pin has a series resistor on 9 of 11 designs, most often 100 Ω (then 1 kΩ). Counted from the KiCad layouts of 11 open source designs using the TS5A21366DCUR.

What parts are used alongside the TS5A21366DCUR?

The MIC842LYC5-TR, MAX4211FETE, MAX7310ATE+, RCLAMP0504FBTCT and TCAN330GDCNT appear in the most repositories here.

Which microcontrollers do boards using the TS5A21366DCUR use?

Most are built on STM32 (4).

How big is a typical board using the TS5A21366DCUR?

The median is 99.8 × 94.6 mm, and 11% are two-layer designs.

What is the most popular open source board using the TS5A21366DCUR?

By GitHub stars, OreSat Star Tracker Card by oresat, with 49 stars.

Can I simulate one of these boards using the TS5A21366DCUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part