14 open source boards using the MIC842LYC5-TR
Real designs built with the MIC842LYC5-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OreSat Star Tracker Card
oresat
99.8 × 94.6 mm163 parts4LNo license49OreSat GPS Card
oresat
99.8 × 94.6 mm210 parts4LCERN-OHL-S-2.034OreSat Battery Card
oresat
99.8 × 94.6 mm267 parts4LNo license27OreSat Live Card
oresat
99.8 × 94.6 mm314 parts4LGPL-3.017OreSat CFC Processor Card
oresat
99.8 × 94.6 mm163 parts4LCERN-OHL-S-2.02OreSat1 +Z End Card
oresat
99.8 × 94.6 mm77 parts4LNo license2STM32
Oresat batteries
BrownSpaceEngineering
88 × 84.9 mm304 parts4LNo license0OreSat MCXN Proto Card
oresat
99.8 × 94.6 mm117 parts4LNo license8CFC Sensor Card
oresat
50.7 × 24.3 mm149 parts4LCERN-OHL-S-2.02ESI -Z End Card
oresat
99.8 × 94.6 mm70 parts4LNo license2OreSat Reaction Wheel Card
oresat
99.8 × 94.6 mm258 parts4LGPL-2.021OreSat1 -Z End Card
oresat
99.8 × 94.6 mm70 parts4LNo license2ESI +Z End Card
oresat
99.8 × 94.6 mm50 parts4LNo license2OreSat Mag Card
oresat
99.8 × 94.6 mm175 parts4LGPL-2.021
How designs wire the MIC842LYC5-TR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MIC842LYC5-TR connects to, and the resistors, capacitors and other passives placed on it.
- The INP_1 pin has a capacitor to GND on 9 of 9 designs, most often 1 µF.
- The INP_1 pin has a series resistor on 9 of 9 designs, most often 1 MΩ (then 330 kΩ).
- The OUT_4 pin has a series resistor on 9 of 9 designs, most often 665 kΩ.
- The VDD_5 pin has a capacitor to GND on 9 of 9 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INP_1pin 1 | Connected to: Signal 100% |
|
| GND_2pin 2 | Connected to: GND 100% | — |
| 3_3pin 3 | Connected to: Not connected 100% | — |
| OUT_4pin 4 | Connected to: Signal 100% |
|
| VDD_5pin 5 | Connected to: MIC842LYC5-TR 89%, MAX7310ATE+ 67%, MAX7310ATE 22% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OreSat Star Tracker Card by oresat, OreSat GPS Card by oresat, OreSat Battery Card by oresat and OreSat Mag Card by oresat.
The MIC842LYC5-TR in open source designs
The gallery holds 14 open source boards using the MIC842LYC5-TR from 9 GitHub repositories; a typical one measures about 99.8 × 94.6 mm and carries around 163 components.
100% use four copper layers or more, and 43% carry an open source license.
The most starred is OreSat Star Tracker Card by oresat.
Parts used alongside the MIC842LYC5-TR
Microcontrollers on boards using the MIC842LYC5-TR
What boards using the MIC842LYC5-TR are built for
MIC842LYC5-TR: common questions
Where can I find a MIC842LYC5-TR reference design?
Each of the 14 boards on this page is a real design using the MIC842LYC5-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MIC842LYC5-TR INP_1 pin connected?
The INP_1 pin has a capacitor to GND on 9 of 9 designs, most often 1 µF. Counted from the KiCad layouts of 9 open source designs using the MIC842LYC5-TR.
What resistor goes on the MIC842LYC5-TR OUT_4 pin?
The OUT_4 pin has a series resistor on 9 of 9 designs, most often 665 kΩ. Counted from the KiCad layouts of 9 open source designs using the MIC842LYC5-TR.
How is the MIC842LYC5-TR VDD_5 pin connected?
The VDD_5 pin has a capacitor to GND on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the MIC842LYC5-TR.
What parts are used alongside the MIC842LYC5-TR?
The TS5A21366DCUR, MAX4211FETE, MAX7310ATE+, RCLAMP0504FBTCT and TPS62111RSA appear in the most repositories here.
Which microcontrollers do boards using the MIC842LYC5-TR use?
Most are built on STM32 (1).
How big is a typical board using the MIC842LYC5-TR?
The median is 99.8 × 94.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the MIC842LYC5-TR?
By GitHub stars, OreSat Star Tracker Card by oresat, with 49 stars.
Can I simulate one of these boards using the MIC842LYC5-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.