Child wearable notification bracelet
oyeniyihakeem08-blip·child-wearable-notification-bracelet
About the Child wearable notification bracelet PCB
Child wearable notification bracelet is an open source ESP32 PCB design by oyeniyihakeem08-blip, published on GitHub. It is a 4-layer board measuring 27 × 34 mm, with 38 components from 21 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the AP2112K-3.3, BQ24074RGT, MAX17048G+T10 and TLV3691IDCKR. By type, the board carries 21 resistors, 7 capacitors, 5 ICs, 2 transistors, 1 connector and 1 switch.
It belongs with the iot & wireless, wearables and power & battery designs in this gallery.
From the project
Wi-Fi wristband that tells children what’s expected of them, with a caregiver dashboard and offline alerts. ESP32-S3 · MQTT · KiCad.
A Wi-Fi wristband that lets caregivers in a care facility monitor children and tell each child what is expected of them, such as meal time, bath time or sleep time, wherever they are: caregivers send a clear visual cue with a short message from any browser, the bracelet beeps or buzzes to get the child's attention, and a dashboard tells staff when a bracelet goes offline.

Main components on the Child wearable notification bracelet
Child wearable notification bracelet bill of materials (BOM)
38 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | ESP32-S3-WROOM-1-N8R8 | ESP32-S3-WROOM-1 | U2 |
| 1 | BQ24074RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U3 |
| 1 | MAX17048G+T10 | 21-0168E_T822-3_MXM | U5 |
| 1 | TLV3691IDCKR | SOT65P210X110-5N | U6 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 1 | 5034801200 | CON_5034801200_MOL | J3 |
| 1 | TS-1187A-B-A-B | SW_TS-1187A-B-A-B | S1 |
| 1 | 1N4148W | D_SOD-123 | D1 |
| 3 | 1UF 1uf | C_0603_1608Metric | C1, C6, C7 |
| 1 | 0.1UF 0.1uf | C_0603_1608Metric | C2 |
| 3 | 10UF 10uf | C_0603_1608Metric | C3, C4, C5 |
| 7 | 10K 10k | R_0603_1608Metric | R1, R2, R5, R7, R8, R9, R10 |
| 2 | 100R 100r | R_0603_1608Metric | R3, R20 |
| 2 | 100K 100k | R_0603_1608Metric | R4, R21 |
| 1 | 8.2R 8.2r | R_0603_1608Metric | R6 |
| 3 | 4.7K 4.7k | R_0603_1608Metric | R11, R18, R19 |
| 1 | 3.3K 3.3k | R_0603_1608Metric | R12 |
| 1 | 20M | R_0603_1608Metric | R13 |
| 3 | 1M | R_0603_1608Metric | R14, R16, R17 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.05M | R_0603_1608Metric | R15 |
Child wearable notification bracelet design files
The KiCad project lives in the oyeniyihakeem08-blip/child-wearable-notification-bracelet repository on GitHub; these links point at the commit this page was built from.
Child wearable notification bracelet: common questions
What microcontroller does the Child wearable notification bracelet use?
The Child wearable notification bracelet is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the Child wearable notification bracelet PCB?
The Child wearable notification bracelet measures 27 × 34 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Child wearable notification bracelet?
38 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Child wearable notification bracelet design files?
From the oyeniyihakeem08-blip/child-wearable-notification-bracelet repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Child wearable notification bracelet design in my own project?
The repository has no license, so all rights stay with oyeniyihakeem08-blip. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Child wearable notification bracelet without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k