HardLabs

OzSec2025 MirroredPower

OzSecICT·badge-crashandburn·hardware/kicad/OzSec2025/OzSec2025_MirroredPower.kicad_pcb

OzSec2025 MirroredPower PCB layout, top view — open source RP2040/RP2350 board by OzSecICT

About the OzSec2025 MirroredPower PCB

OzSec2025 MirroredPower is an open source RP2040/RP2350 PCB design by OzSecICT, published on GitHub. It is a 2-layer board measuring 88.6 × 92.6 mm, with 51 components from 37 distinct parts.

Its main chip is the ME4054BM5G-N, from the RP2040/RP2350 family. Other key parts include the TLV1117LV-33, USBLC6-2SC6, RP2350_80QFN and W25Q128JVS. By type, the board carries 22 capacitors, 11 resistors, 5 ICs, 3 battery holders, 3 switches and 2 connectors.

It belongs with the wearables designs in this gallery.

From the project

This badge will be built in MicroPython on an RP2040 or RP2350, and support multiple minigames.

This badge will be built in MicroPython on an RP2040 or RP2350, and support multiple minigames.

This repo is currently a work in progress as we start planning how to lay out the badge firmware.

Install Python, and then install mpremote. Install VS Code, and clone this repository. Open the repo in VS Code and install the recommended extensions.

Currently the badge firmware is developed with a Raspberry Pi Pico 2 on a breadboard. If you want to see the code, obtain one and follow these steps to get it setup: - Plug in drive while holding BOOTSEL and use the flash script or VS Code Task to…

Main components on the OzSec2025 MirroredPower

TLV1117LV-33USBLC6-2SC6ME4054BM5G-NRP2350_80QFNW25Q128JVS

OzSec2025 MirroredPower bill of materials (BOM)

51 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TLV1117LV-33
USBLC6-2SC6
U1
1
USBLC6-2SC6
W25Q128JVS
U2
1
ME4054BM5G-N
RP2350_80QFN
U3
1
RP2350_80QFN
ME4054BM5G-N
U4
1
W25Q128JVS
TLV1117LV-33
U5
1
ABM8-272-T3
Y1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
SM03B-SRSS-TB
J2
1
Battery
BT1
1
C2979179
Battery_Clip_+
BT2
1
Battery_Clip_-
BT3
1
C261957
Fuse
F1
1
C431541
SW_Push
SW1
1
SW_Push
SW2
1
POWER
SW3
1
C2296
POWER
D1
1
C2297
CHARGING
D2
1
3.3U
3.3u
L1
1
100N
15p
C1
1
15P
15p
C2
Show 17 more
QtyPartRefs
1
15P
0.1uF
C3
1
10U
100n
C4
1
100UF
100uF
C5
1
1UF
4.7u
C6
1
4.7U
4.7u
C7
2
4.7U
100n
C8, C11
1
100N
4.7u
C9
1
4.7U
4.7u
C10
9
100N
100n
C12, C13, C14, C15, C17, C18, C19, C20 +1
1
100N
10u
C16
1
100N
1uF
C22
4
1k
R1, R2, R4, R11
1
33
R3
2
5.1K
27
R5, R6
1
1K
R7
2
5.1K
R8, R9
1
2K
R10

OzSec2025 MirroredPower design files

The KiCad project lives in the OzSecICT/badge-crashandburn repository on GitHub; these links point at the commit this page was built from.

OzSec2025 MirroredPower: common questions

What microcontroller does the OzSec2025 MirroredPower use?

The OzSec2025 MirroredPower is built around the ME4054BM5G-N, from the RP2040/RP2350 family.

How big is the OzSec2025 MirroredPower PCB?

The OzSec2025 MirroredPower measures 88.6 × 92.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OzSec2025 MirroredPower?

51 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OzSec2025 MirroredPower design files?

From the OzSecICT/badge-crashandburn repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the OzSec2025 MirroredPower design in my own project?

The repository has no license, so all rights stay with OzSecICT. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the OzSec2025 MirroredPower without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in badge-crashandburn

Similar boards