7 open source boards using the TLV1117LV-33

Real designs built with the TLV1117LV-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The TLV1117LV-33 in open source designs

The gallery holds 7 open source boards using the TLV1117LV-33 from 4 GitHub repositories; a typical one measures about 88.6 × 92.6 mm and carries around 77 components.

57% use four copper layers or more, and 43% carry an open source license.

The most starred is Iot thing 11 by mortens-lab.

Microcontrollers on boards using the TLV1117LV-33

What boards using the TLV1117LV-33 are built for

TLV1117LV-33: common questions

Where can I find a TLV1117LV-33 reference design?

Each of the 7 boards on this page is a real design using the TLV1117LV-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TLV1117LV-33 use?

Most are built on ESP32 (3) and RP2040/RP2350 (2).

How big is a typical board using the TLV1117LV-33?

The median is 88.6 × 92.6 mm, and 43% are two-layer designs.

What is the most popular open source board using the TLV1117LV-33?

By GitHub stars, Iot thing 11 by mortens-lab, with 51 stars.

Can I simulate one of these boards using the TLV1117LV-33 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part