HardLabs

Chaser Board

Paa-Kwasi-04·Kicad_Projects·Chaser Board/Chaser Board.kicad_pcb

Chaser Board layout, top view — open source AVR/Arduino board by Paa-Kwasi-04

About the Chaser Board

Chaser Board is an open source AVR/Arduino PCB design by Paa-Kwasi-04, published on GitHub. It is a 2-layer board measuring 51.5 × 60.5 mm, with 22 components from 7 distinct parts.

Its main chip is the ATMEGA328-P, from the AVR/Arduino family. By type, the board carries 8 diodes, 8 resistors, 2 capacitors, 1 IC and 1 crystal.

Main components on the Chaser Board

ATMEGA328-P

Chaser Board bill of materials (BOM)

22 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328-P
ATmega328-P
U1
1
Crystal
Y1
1
0.1u
Creset1
1
10k
Rreset1
8
LED
D1, D2, D3, D4, D5, D6, D7, D8
2
22P
22p
C1, C2
8
300
R1, R2, R3, R4, R5, R6, R7, R8

Chaser Board design files

The KiCad project lives in the Paa-Kwasi-04/Kicad_Projects repository on GitHub; these links point at the commit this page was built from.

Chaser Board: common questions

What microcontroller does the Chaser Board use?

The Chaser Board is built around the ATMEGA328-P, from the AVR/Arduino family.

How big is the Chaser Board?

The Chaser Board measures 51.5 × 60.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Chaser Board?

22 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Chaser Board design files?

From the Paa-Kwasi-04/Kicad_Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Chaser Board design in my own project?

The repository has no license, so all rights stay with Paa-Kwasi-04. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Chaser Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Kicad_Projects

Similar boards