HardLabs

ESP32 Dev Board Clone

Paa-Kwasi-04·Kicad_Projects·ESP32 Dev Board Clone/ESP32 Dev Board Clone.kicad_pcb

ESP32 Dev Board Clone layout, top view — open source ESP32 board by Paa-Kwasi-04

About the ESP32 Dev Board Clone

ESP32 Dev Board Clone is an open source ESP32 PCB design by Paa-Kwasi-04, published on GitHub. It is a 2-layer board measuring 67.5 × 78.3 mm, with 31 components from 19 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CP2102N-AXX-XQFN24 and AMS1117-3.3. By type, the board carries 10 resistors, 9 capacitors, 3 ICs, 3 transistors, 3 connectors and 2 diodes.

It belongs with the dev boards & breakouts, iot & wireless and usb & debug tools designs in this gallery.

Main components on the ESP32 Dev Board Clone

ESP32-WROOM-32CP2102N-AXX-XQFN24AMS1117-3.3

ESP32 Dev Board Clone bill of materials (BOM)

31 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
CP2102N-AXX-XQFN24
CP2102N-Axx-xQFN24
U2
1
AMS1117-3.3
U3
3
PMOS
Q1, Q2, Q3
1
CONN_01X06_PIN
Conn_01x06_Pin
J2
1
Barrel_Jack
J3
1
USB_C_PLUG_USB2.0
USB_C_Plug_USB2.0
P1
1
Fuse
F1
1
LED
D1
1
SS14
D2
1
100NF
100nF
C1
5
0.1µF
C2, C3, C5, C6, C9
1
10µF
C4
1
470UF
470uF
C7
1
0.1UF
0.1uF
C8
3
5.1KΩ
R1, R6, R7
3
10KΩ
R2, R8, R9
3
100KΩ
R3, R4, R10
1
330Ω
R5

ESP32 Dev Board Clone design files

The KiCad project lives in the Paa-Kwasi-04/Kicad_Projects repository on GitHub; these links point at the commit this page was built from.

ESP32 Dev Board Clone: common questions

What microcontroller does the ESP32 Dev Board Clone use?

The ESP32 Dev Board Clone is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the ESP32 Dev Board Clone?

The ESP32 Dev Board Clone measures 67.5 × 78.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32 Dev Board Clone?

31 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32 Dev Board Clone design files?

From the Paa-Kwasi-04/Kicad_Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32 Dev Board Clone design in my own project?

The repository has no license, so all rights stay with Paa-Kwasi-04. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32 Dev Board Clone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Kicad_Projects

Similar boards