BeanBoardSPI
PainfulDiodes·BeanBoardSPI·kicad/BeanBoardSPI.kicad_pcb
About the BeanBoardSPI PCB
BeanBoardSPI is an open source PCB design by PainfulDiodes, published on GitHub under the MIT license. It is a 4-layer board measuring 199.4 × 80 mm, with 42 components from 24 distinct parts.
Other key parts include the 74HC02, 74HC138, 74HC74, 74HC373 and 74HC164. By type, the board carries 15 connectors, 12 ICs, 12 capacitors and 3 jumpers.
From the project
Hardware SPI interface plugin module for BeanBoard
SPI controller in 74' logic for BeanBoard / BeanZee Z80 computer.
SPI is a fast serial interface commonly used for connecting microcontrollers to peripherals like SD cards, displays and sensors.
The intent of this design is to provide access to an RA8875 TFT panel controller and to flash memory modules on my Z80 homebrew computer. The Marvin monitor program provides software support for this configuration.

Main components on the BeanBoardSPI
BeanBoardSPI bill of materials (BOM)
42 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HC02 | DIP-14_W7.62mm_Socket | U1, U2 |
| 1 | 74HC138 | DIP-16_W7.62mm_Socket | U3 |
| 1 | 74HC74 | DIP-14_W7.62mm_Socket | U4 |
| 1 | 74HC373 | DIP-20_W7.62mm_Socket | U5 |
| 1 | 74HC164 | DIP-14_W7.62mm_Socket | U6 |
| 2 | 74HC244 | DIP-20_W7.62mm_Socket | U7, U8 |
| 4 | 74HC165 | DIP-16_W7.62mm_Socket | U9, U10, U11, U12 |
| 2 | Conn_01x16_Pin | PinHeader_1x16_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 2 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J4, J6 |
| 1 | GPO | PinSocket_1x10_P2.54mm_Vertical | J5 |
| 1 | GPI | PinSocket_1x10_P2.54mm_Vertical | J7 |
| 1 | Power | PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | SPI0 (RA8875) | PinHeader_1x15_P2.54mm_Vertical | J9 |
| 1 | SPI1 | PinHeader_1x07_P2.54mm_Vertical | J10 |
| 1 | SPI2 | PinHeader_1x07_P2.54mm_Vertical | J11 |
| 1 | SPI3 | PinHeader_1x07_P2.54mm_Vertical | J12 |
| 1 | SPI4 | PinHeader_1x07_P2.54mm_Vertical | J13 |
| 1 | SPI5 | PinHeader_1x07_P2.54mm_Vertical | J14 |
| 1 | SPI6 | PinHeader_1x07_P2.54mm_Vertical | J15 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CLK | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | CLK/2 | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | CLK/4 | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 12 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
BeanBoardSPI design files
The KiCad project lives in the PainfulDiodes/BeanBoardSPI repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/BeanBoardSPI.kicad_pcb
- Schematickicad/BeanBoardSPI.kicad_sch
BeanBoardSPI: common questions
How big is the BeanBoardSPI PCB?
The BeanBoardSPI measures 199.4 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the BeanBoardSPI?
42 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the BeanBoardSPI design files?
From the PainfulDiodes/BeanBoardSPI repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BeanBoardSPI design in my own project?
Yes, under the terms of its MIT license, which PainfulDiodes chose for the repository.