21 open source boards using the 74HC373
Real designs built with the 74HC373, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0859PIC
Gameboy-Color-Megamem-Card
RWeick
53.5 × 89.8 mm13 parts2LGPL-3.08Sbc6120-rbc front panel submini
djtersteegc
200.7 × 106.7 mm100 parts2LGPL-2.06Civil25
raleighslack
137.2 × 137.2 mm40 parts2LApache-2.06AVR/Arduino
Emuprom
agkaminski
88.3 × 68.6 mm34 parts2LCC0-1.03AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license2AVR/Arduino
Zxkbd
jtsiomb
148.3 × 48 mm59 parts2LGPL-3.02BeanBoardSPI
PainfulDiodes
199.4 × 80 mm42 parts4LMIT2Amix 68k (r0)
SmallRobot2000
333.4 × 149.9 mm169 parts4LNo license1Micro
jurendono
200 × 150 mm175 parts2LNo license0-816-board
snippyrow
182 × 138.8 mm137 parts2LMIT0Griffin
bradgrantham
260.6 × 185.6 mm110 parts4LApache-2.00OpenTendo
circuitly
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.00HVC-CPU-07
starlightk7
87.3 × 124.9 mm55 parts4LCERN-OHL-S-2.03274HCT6526 Board 4
dmolinagarcia
100 × 100 mm76 parts4LNo license14SBC6120 Mini Front Panel
djtersteegc
198.1 × 121.3 mm96 parts2LGPL-2.06AVR/Arduino
Emuprom
agkaminski
61.5 × 87.6 mm33 parts2LCC0-1.02Amix 68k(r1)
SmallRobot2000
333.4 × 149.9 mm169 parts4LNo license1Expansion Board A
jensboe
58.7 × 55.2 mm49 parts4LNo license0Amix 68k r2
SmallRobot2000
333.4 × 149.9 mm169 parts4LNo license1Amix 68k r2 (T1)
SmallRobot2000
333.4 × 149.9 mm169 parts4LNo license1
How designs wire the 74HC373
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the 74HC373 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 11 of 17 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: VCC 100% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenTendo by Redherring32, HVC-CPU-07 by starlightk7, 74HCT6526 Board 4 by dmolinagarcia and Gameboy-Color-Megamem-Card by RWeick.
The 74HC373 in open source designs
The gallery holds 21 open source boards using the 74HC373 from 17 GitHub repositories; a typical one measures about 196.3 × 121.3 mm and carries around 93 components.
57% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is OpenTendo by Redherring32.
Parts used alongside the 74HC373
Microcontrollers on boards using the 74HC373
What boards using the 74HC373 are built for
74HC373: common questions
Where can I find a 74HC373 reference design?
Each of the 21 boards on this page is a real design using the 74HC373. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC373 VCC pin?
The VCC pin has a decoupling capacitor on 11 of 17 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 17 open source designs using the 74HC373.
What parts are used alongside the 74HC373?
The 74HC74, 74HC04, 74HC139, 74HC244 and 74HC32 appear in the most repositories here.
Which microcontrollers do boards using the 74HC373 use?
Most are built on AVR/Arduino (4) and PIC (1).
How big is a typical board using the 74HC373?
The median is 196.3 × 121.3 mm, and 57% are two-layer designs.
What is the most popular open source board using the 74HC373?
By GitHub stars, OpenTendo by Redherring32, with 859 stars.
Can I simulate one of these boards using the 74HC373 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.