HardLabs

RP2040 Template

palginpav·tracewise·data/benchmark-boards/rp2040-dev-board/RP2040 Dev Board.kicad_pcb

RP2040 Template PCB layout, top view — open source RP2040/RP2350 board by palginpav

About the RP2040 Template PCB

RP2040 Template is an open source RP2040/RP2350 PCB design by palginpav, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 20.3 × 48.3 mm, with 44 components from 18 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AZ1117R-3.3TRE1 and W25Q128JVS. By type, the board carries 18 capacitors, 9 resistors, 8 diodes, 4 connectors, 3 ICs and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

AI-assisted place & route for KiCad — datasheet-grounded schematic review, constraint generation for autorouting, analytical placement

AI-assisted place & route for KiCad — schematic review with datasheet grounding, constraint generation for autorouting, and analytical placement. Open source, local-first.

Autorouters disappoint not because the solvers are weak, but because nobody feeds them the constraints that make routing meaningful — net classes, differential pairs, length rules, fanout strategy. Schematic review tools check syntax, not electronics. TraceWise applies LLMs exactly where they help:

Main components on the RP2040 Template

AZ1117R-3.3TRE1RP2040W25Q128JVS

RP2040 Template bill of materials (BOM)

44 components, 18 distinct parts.

QtyPartRefs
1
AZ1117R-3.3TRE1
U201
1
RP2040
U202
1
W25Q128JVS
U205
1
Crystal_GND24
Y201
2
Conn_01x19
J101, J102
1
Conn_01x03
J103
1
TYPE-C-31-M-12
J201
1
~{USB_BOOT}
SW202
2
LED_Filled
D101, D102
2
SHOTTKY
D103, D104
4
ESD_TVS
D201, D202, D203, D205
14
10uF
C201, C202, C204, C205, C207, C208, C212, C213 +6
2
30pF
C203, C206
2
100uF
C209, C210
3
10k
R101, R102, R213
2
1k
R201, R211
2
27
R203, R204
2
5k1
R212, R214

RP2040 Template design files

The KiCad project lives in the palginpav/tracewise repository on GitHub; these links point at the commit this page was built from.

RP2040 Template: common questions

What microcontroller does the RP2040 Template use?

The RP2040 Template is built around the RP2040, from the RP2040/RP2350 family.

How big is the RP2040 Template PCB?

The RP2040 Template measures 20.3 × 48.3 mm, has 4 copper layers and is 1.59 mm thick.

How many components are on the RP2040 Template?

44 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the RP2040 Template design files?

From the palginpav/tracewise repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RP2040 Template design in my own project?

Yes, under the terms of its Apache-2.0 license, which palginpav chose for the repository.

Can I test firmware for the RP2040 Template without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in tracewise

Similar boards