CLASSD-AMP
PanditAdityaJi·CLASSD-AMP·KICADSCCLASSD/Classdamp ltversion.kicad_pcb
About the CLASSD-AMP PCB
CLASSD-AMP is an open source PCB design by PanditAdityaJi, published on GitHub. It is a 2-layer board measuring 54 × 61 mm, with 25 components from 16 distinct parts.
Other key parts include the NE555D and LM321. By type, the board carries 8 resistors, 6 capacitors, 4 transistors, 3 connectors, 2 ICs and 1 speaker.
It belongs with the audio designs in this gallery.
From the project
A low-power Class-D audio amplifier built around the NE555 timer as a PWM generator. The design covers the full signal path from microphone/line input to an 8 Ω speaker, with LTspice simulation and a KiCad PCB layout included.
A low-power Class-D audio amplifier built around the NE555 timer as a PWM generator. The design covers the full signal path from microphone/line input to an 8 Ω speaker, with LTspice simulation and a KiCad PCB layout included.
The audio signal and a triangle carrier are compared by an op-amp running open-loop. The comparator output triggers the NE555, which produces a PWM waveform whose duty cycle tracks the audio amplitude. A complementary BJT pair buffers the PWM to fast-charge the MOSFET gates of an (PMOS) / (NMOS) half-bridge. An LC low-pass filter strips the switching harmonics, leaving…
Main components on the CLASSD-AMP
CLASSD-AMP bill of materials (BOM)
25 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555D | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LM321 | SOT-23-5 | U2 |
| 1 | NPN | SOT-23 | Q1 |
| 1 | PNP | SOT-23 | Q2 |
| 1 | PMOS | TO-92 | Q3 |
| 1 | NMOS | TO-92 | Q4 |
| 3 | Conn_01x02_Pin | PhoenixContact_MCV_1,5_2-GF-5.08_1x02_P5.08mm_Vertical_ThreadedFlange | J1, J2, J3 |
| 1 | Speaker | MagneticBuzzer_ProSignal_ABT-410-RC | LS1 |
| 1 | 33uH | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L1 |
| 1 | 1nF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1 |
| 3 | 10nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3, C6 |
| 2 | 0.47uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5 |
| 2 | 1k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R8 |
| 1 | 3.3k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R2 |
| 4 | 100k | R_0508_1220Metric_Pad1.12x2.15mm_HandSolder | R3, R4, R5, R6 |
| 1 | 8 | R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R7 |
CLASSD-AMP design files
The KiCad project lives in the PanditAdityaJi/CLASSD-AMP repository on GitHub; these links point at the commit this page was built from.
CLASSD-AMP: common questions
How big is the CLASSD-AMP PCB?
The CLASSD-AMP measures 54 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CLASSD-AMP?
25 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the CLASSD-AMP design files?
From the PanditAdityaJi/CLASSD-AMP repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CLASSD-AMP design in my own project?
The repository has no license, so all rights stay with PanditAdityaJi. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687