PanStamp IO1 carrier board
About the PanStamp IO1 carrier board
PanStamp IO1 carrier board is an open source PCB design by panStamp, published on GitHub under the GPL-2.0 license. It is a board measuring 2 × 5 mm, with 51 components from 25 distinct parts.
Other key parts include the MCP1702-3.0. By type, the board carries 16 resistors, 13 diodes, 8 connectors, 5 capacitors, 2 transistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Kicad projects
Main components on the PanStamp IO1 carrier board
PanStamp IO1 carrier board bill of materials (BOM)
51 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1702-3.0 | SOT23 | U1 |
| 2 | Q_NMOS_GSD | SOT23 | Q1, Q2 |
| 3 | CONN_01X02 | terminal_block_3.5mm_2P | P3, P4, P5 |
| 5 | CONN_01X03 | terminal_block_3.5mm_3P | P7, P8, P9, P10, P11 |
| 1 | P*** | 1pin | 1PIN |
| 1 | ANTENNA | SMA_RightAngle_Tyco | ANT1 |
| 1 | Battery | BAT_AA_HOLDER_02 | BT1 |
| 1 | Jumper_NC_Small | Pin_Header_Straight_1x02 | JP1 |
| 1 | PANSTAMP_NRG2 | PANSTAMP_2 | PS1 |
| 1 | SW_PUSH_SMALL | switch-tact-noah | SW1 |
| 2 | LED | SM0603S_POL | D1, D2 |
| 2 | BAS16J | SOD323 | D3, D5 |
| 1 | D_Schottky | SMA | D4 |
| 6 | D_Schottky_x2_ACom_KKA | SOT23 | D6, D7, D8, D9, D10, D11 |
| 2 | LED | Pin_Header_Straight_1x02 | D12, D13 |
| 2 | 4.7u | SM0603S | C1, C2 |
| 1 | 1u | SM0603S | C3 |
| 1 | 100n | SM0603S | C4 |
| 1 | 1 | SUPERCAP_1F_5V | C5 |
| 1 | 402K | SM0603S | R1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100K | SM0603S | R2 |
| 2 | 150 | SM0603S | R3, R7 |
| 2 | 470 | SM0603S | R4, R5 |
| 8 | 1M | SM0603S | R6, R8, R11, R12, R13, R14, R15, R16 |
| 2 | 1k | SM0603S | R9, R10 |
PanStamp IO1 carrier board design files
The KiCad project lives in the panStamp/kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutcb-io1/cb-io.kicad_pcb
PanStamp IO1 carrier board: common questions
How big is the PanStamp IO1 carrier board?
The PanStamp IO1 carrier board measures 2 × 5 mm and is 1.6002 mm thick.
How many components are on the PanStamp IO1 carrier board?
51 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the PanStamp IO1 carrier board design files?
From the panStamp/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PanStamp IO1 carrier board design in my own project?
Yes, under the terms of its GPL-2.0 license, which panStamp chose for the repository.
More boards in kicad
PanStamp flexible battery board
2 × 5 mm80 partsGPL-2.015
TI MSP430/CCPanStamp LoraNode
33.1 × 64.7 mm65 partsGPL-2.015
ESP8266PanStamp touch panel board
113 × 180 mm62 partsGPL-2.015
PanStamp CO2 battery board
75 × 95 mm34 partsGPL-2.015
Linkit carrier board
81 × 76 mm32 partsGPL-2.015
Minibat carrier board for panStamp
25.4 × 55.8 mm29 partsGPL-2.015
Cb minibat chipant
25.4 × 56.6 mm29 partsGPL-2.015
Battery board for panStamp
50.1 × 70.1 mm27 partsGPL-2.015
ESP8266Carrier board for panStamp and ESP-12E
58.1 × 64.2 mm24 partsGPL-2.015
Cb usb
25.4 × 55.8 mm22 partsGPL-2.015
RGB driver board for panStamp
25.4 × 55.8 mm13 partsGPL-2.015
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979