Carrier board for panStamp and ESP-12E
About the Carrier board for panStamp and ESP-12E
Carrier board for panStamp and ESP-12E is an open source ESP8266 PCB design by panStamp, published on GitHub under the GPL-2.0 license. It is a board measuring 58.1 × 64.2 mm, with 24 components from 18 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the AP7365, ANTENNA and LY-SK10. By type, the board carries 5 resistors, 4 ICs, 4 diodes, 4 capacitors, 2 connectors and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Kicad projects
Main components on the Carrier board for panStamp and ESP-12E
Carrier board for panStamp and ESP-12E bill of materials (BOM)
24 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7365 | SOT-23-5 | U1 |
| 1 | ESP-12E | ESP-12E | U2 |
| 1 | ANTENNA | SMA_RightAngle_Tyco | U3 |
| 1 | LY-SK10 | LY-SK10 | U4 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | P1 |
| 1 | CONN_01X02 | PWR_3A | P3 |
| 1 | CONN_01X07 | Pin_Header_Straight_1x07 | PROG1 |
| 1 | PANSTAMP_NRG2 | PANSTAMP_2 | PS1 |
| 1 | PANSTAMP_MINIBAT | minibat | PS2 |
| 2 | SW_PUSH_SMALL | switch-tact-noah | SW1, SW2 |
| 2 | LED | SM0603S_POL | D1, D2 |
| 1 | D_Schottky_x2_ACom_KKA | SOT23 | D3 |
| 1 | BAS16 | SOD323 | D4 |
| 1 | 10u | SM0603S | C1 |
| 2 | 1u | SM0603S | C2, C3 |
| 1 | 100n | SM0603S | C4 |
| 3 | 10k | SM0603S | R1, R2, R3 |
| 2 | 470 | SM0603S | R4, R5 |
Carrier board for panStamp and ESP-12E design files
The KiCad project lives in the panStamp/kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutcb-esp/cb-esp.kicad_pcb
Carrier board for panStamp and ESP-12E: common questions
What microcontroller does the Carrier board for panStamp and ESP-12E use?
The Carrier board for panStamp and ESP-12E is built around the ESP-12E, from the ESP8266 family.
How big is the Carrier board for panStamp and ESP-12E?
The Carrier board for panStamp and ESP-12E measures 58.1 × 64.2 mm and is 1.6002 mm thick.
How many components are on the Carrier board for panStamp and ESP-12E?
24 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carrier board for panStamp and ESP-12E design files?
From the panStamp/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Carrier board for panStamp and ESP-12E design in my own project?
Yes, under the terms of its GPL-2.0 license, which panStamp chose for the repository.
Can I test firmware for the Carrier board for panStamp and ESP-12E without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in kicad
PanStamp flexible battery board
2 × 5 mm80 partsGPL-2.015
TI MSP430/CCPanStamp LoraNode
33.1 × 64.7 mm65 partsGPL-2.015
ESP8266PanStamp touch panel board
113 × 180 mm62 partsGPL-2.015
PanStamp IO1 carrier board
2 × 5 mm51 partsGPL-2.015
PanStamp CO2 battery board
75 × 95 mm34 partsGPL-2.015
Linkit carrier board
81 × 76 mm32 partsGPL-2.015
Minibat carrier board for panStamp
25.4 × 55.8 mm29 partsGPL-2.015
Cb minibat chipant
25.4 × 56.6 mm29 partsGPL-2.015
Battery board for panStamp
50.1 × 70.1 mm27 partsGPL-2.015
Cb usb
25.4 × 55.8 mm22 partsGPL-2.015
RGB driver board for panStamp
25.4 × 55.8 mm13 partsGPL-2.015
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398