Battery board for panStamp
About the Battery board for panStamp
Battery board for panStamp is an open source PCB design by panStamp, published on GitHub under the GPL-2.0 license. It is a board measuring 50.1 × 70.1 mm, with 27 components from 20 distinct parts.
Other key parts include the BMP180, MAX1724, SI7021 and TSL2561. By type, the board carries 10 capacitors, 4 ICs, 3 inductors, 3 resistors, 2 connectors and 1 antenna.
It belongs with the power & battery designs in this gallery.
From the project
Kicad projects
Main components on the Battery board for panStamp
Battery board for panStamp bill of materials (BOM)
27 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMP180 | BMP180 | U1 |
| 1 | MAX1724 | SOT23-5 | U2 |
| 1 | SI7021 | DFN-6 | U3 |
| 1 | TSL2561 | uDFN-6 | U4 |
| 1 | CONN_01X02 | 12BH311P | P3 |
| 1 | CONN_01X01 | pin | P4 |
| 1 | P*** | 1pin | 1PIN |
| 1 | ANTENNA | U.FL_CONN | ANT2 |
| 1 | PANSTAMP_NRG2 | PANSTAMP_2 | PS1 |
| 1 | SW_PUSH | switch-tact-noah | SW1 |
| 1 | NTC | SM0603S | TH1 |
| 1 | 10u | SM0805 | L1 |
| 1 | 0 | SM0603S | L2 |
| 1 | ANTENNA | 0868AT43A0020 | L3 |
| 2 | 10u | SM0603S | C1, C4 |
| 2 | 1u | SM0603S | C2, C5 |
| 4 | 100n | SM0603S | C3, C6, C7, C8 |
| 1 | 2.2p | SM0603S | C10 |
| 1 | N.P | SM0603S | C11 |
| 3 | 10k | SM0603S | R1, R2, R3 |
Battery board for panStamp design files
The KiCad project lives in the panStamp/kicad repository on GitHub; these links point at the commit this page was built from.
Battery board for panStamp: common questions
How big is the Battery board for panStamp?
The Battery board for panStamp measures 50.1 × 70.1 mm and is 1.6002 mm thick.
How many components are on the Battery board for panStamp?
27 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Battery board for panStamp design files?
From the panStamp/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Battery board for panStamp design in my own project?
Yes, under the terms of its GPL-2.0 license, which panStamp chose for the repository.
More boards in kicad
PanStamp flexible battery board
2 × 5 mm80 partsGPL-2.015
TI MSP430/CCPanStamp LoraNode
33.1 × 64.7 mm65 partsGPL-2.015
ESP8266PanStamp touch panel board
113 × 180 mm62 partsGPL-2.015
PanStamp IO1 carrier board
2 × 5 mm51 partsGPL-2.015
PanStamp CO2 battery board
75 × 95 mm34 partsGPL-2.015
Linkit carrier board
81 × 76 mm32 partsGPL-2.015
Minibat carrier board for panStamp
25.4 × 55.8 mm29 partsGPL-2.015
Cb minibat chipant
25.4 × 56.6 mm29 partsGPL-2.015
ESP8266Carrier board for panStamp and ESP-12E
58.1 × 64.2 mm24 partsGPL-2.015
Cb usb
25.4 × 55.8 mm22 partsGPL-2.015
RGB driver board for panStamp
25.4 × 55.8 mm13 partsGPL-2.015
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k