Linkit carrier board
About the Linkit carrier board
Linkit carrier board is an open source PCB design by panStamp, published on GitHub under the GPL-2.0 license. It is a board measuring 81 × 76 mm, with 32 components from 21 distinct parts.
Other key parts include the Linkit_Smart_7688, AP2114H-3.3, SIM800L_module and MIC29302. By type, the board carries 10 capacitors, 9 resistors, 4 ICs, 3 diodes, 2 transistors and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Kicad projects
Main components on the Linkit carrier board
Linkit carrier board bill of materials (BOM)
32 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Linkit_Smart_7688 | DIP36-1 | U1 |
| 1 | AP2114H-3.3 | SOT223 | U2 |
| 1 | SIM800L_module | SIM800L_MODULE | U6 |
| 1 | MIC29302 | TO-252 | U8 |
| 2 | Q_NPN_EBC | SOT23EBC | Q1, Q2 |
| 1 | CONN_01X02 | PWR_3A | P5 |
| 1 | P*** | 1pin | 1PIN |
| 1 | ANTENNA | SMA_RightAngle_Tyco | ANT2 |
| 1 | PANSTAMP_NRG2 | PANSTAMP_2 | PS2 |
| 2 | LED | SM0603S_POL | D1, D2 |
| 1 | D_Schottky_x2_ACom_KKA | SOT23 | D3 |
| 2 | 100n | SM0603S | C1, C18 |
| 1 | 100u | SMDCPOL_6.3 | C10 |
| 4 | 1u | SM0603S | C12, C16, C20, C22 |
| 1 | 330u | SMDCPOL_8 | C14 |
| 2 | 4.7u | SM0603S | C19, C21 |
| 2 | 2k2 | SM0603S | R1, R2 |
| 2 | 470 | SM0603S | R3, R4 |
| 3 | 1k | SM0603S | R10, R11, R12 |
| 1 | 100k | SM0603S | R16 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 43k | SM0603S | R17 |
Linkit carrier board design files
The KiCad project lives in the panStamp/kicad repository on GitHub; these links point at the commit this page was built from.
Linkit carrier board: common questions
How big is the Linkit carrier board?
The Linkit carrier board measures 81 × 76 mm and is 1.6002 mm thick.
How many components are on the Linkit carrier board?
32 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Linkit carrier board design files?
From the panStamp/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Linkit carrier board design in my own project?
Yes, under the terms of its GPL-2.0 license, which panStamp chose for the repository.
More boards in kicad
PanStamp flexible battery board
2 × 5 mm80 partsGPL-2.015
TI MSP430/CCPanStamp LoraNode
33.1 × 64.7 mm65 partsGPL-2.015
ESP8266PanStamp touch panel board
113 × 180 mm62 partsGPL-2.015
PanStamp IO1 carrier board
2 × 5 mm51 partsGPL-2.015
PanStamp CO2 battery board
75 × 95 mm34 partsGPL-2.015
Minibat carrier board for panStamp
25.4 × 55.8 mm29 partsGPL-2.015
Cb minibat chipant
25.4 × 56.6 mm29 partsGPL-2.015
Battery board for panStamp
50.1 × 70.1 mm27 partsGPL-2.015
ESP8266Carrier board for panStamp and ESP-12E
58.1 × 64.2 mm24 partsGPL-2.015
Cb usb
25.4 × 55.8 mm22 partsGPL-2.015
RGB driver board for panStamp
25.4 × 55.8 mm13 partsGPL-2.015
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979