PanStamp CO2 battery board
About the PanStamp CO2 battery board
PanStamp CO2 battery board is an open source PCB design by panStamp, published on GitHub under the GPL-2.0 license. It is a board measuring 75 × 95 mm, with 34 components from 24 distinct parts.
Other key parts include the SI7021, MCP1640B, MAX1724-3.3, ANTENNA and COZIR_CO2. By type, the board carries 12 capacitors, 5 ICs, 4 inductors, 4 resistors, 3 connectors and 2 jumpers.
It belongs with the power & battery and sensors designs in this gallery.
From the project
Kicad projects
Main components on the PanStamp CO2 battery board
PanStamp CO2 battery board bill of materials (BOM)
34 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SI7021 | DFN-6 | U1 |
| 1 | MCP1640B | SOT-23-6 | U2 |
| 1 | MAX1724-3.3 | SOT23-5 | U3 |
| 1 | ANTENNA | U.FL_CONN | U4 |
| 1 | COZIR_CO2 | COZIR_AS | U5 |
| 2 | CONN_01X09 | Pin_Header_Straight_1x09 | P1, P2 |
| 1 | CONN_01X01 | Pin_Header_Straight_1x01 | P3 |
| 1 | P*** | 1pin | 1PIN |
| 1 | CONN_2 | BAT_AA_HOLDER_02 | BAT1 |
| 2 | JUMPER | Pin_Header_Straight_1x02 | JP1, JP2 |
| 1 | PANSTAMP_NRG2 | PANSTAMP_2 | PS1 |
| 1 | SW_PUSH_SMALL | switch-tact-noah | SW1 |
| 1 | 4.7u | R_0805 | L1 |
| 1 | 0 | SM0603S | L2 |
| 1 | ANTENNA | 0868AT43A0020 | L3 |
| 1 | 10u | SM0805 | L4 |
| 4 | 10u | SM0603S | C1, C2, C5, C10 |
| 2 | 1u | SM0603S | C3, C11 |
| 4 | 100n | SM0603S | C4, C6, C7, C12 |
| 1 | 2.2p | SM0603S | C8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | N.P. | SM0603S | C9 |
| 1 | 976k | SM0603S | R1 |
| 1 | 562k | SM0603S | R2 |
| 2 | 10k | SM0603S | R3, R5 |
PanStamp CO2 battery board design files
The KiCad project lives in the panStamp/kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutcb-co2/cb_co2.kicad_pcb
PanStamp CO2 battery board: common questions
How big is the PanStamp CO2 battery board?
The PanStamp CO2 battery board measures 75 × 95 mm and is 1.6002 mm thick.
How many components are on the PanStamp CO2 battery board?
34 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the PanStamp CO2 battery board design files?
From the panStamp/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PanStamp CO2 battery board design in my own project?
Yes, under the terms of its GPL-2.0 license, which panStamp chose for the repository.
More boards in kicad
PanStamp flexible battery board
2 × 5 mm80 partsGPL-2.015
TI MSP430/CCPanStamp LoraNode
33.1 × 64.7 mm65 partsGPL-2.015
ESP8266PanStamp touch panel board
113 × 180 mm62 partsGPL-2.015
PanStamp IO1 carrier board
2 × 5 mm51 partsGPL-2.015
Linkit carrier board
81 × 76 mm32 partsGPL-2.015
Minibat carrier board for panStamp
25.4 × 55.8 mm29 partsGPL-2.015
Cb minibat chipant
25.4 × 56.6 mm29 partsGPL-2.015
Battery board for panStamp
50.1 × 70.1 mm27 partsGPL-2.015
ESP8266Carrier board for panStamp and ESP-12E
58.1 × 64.2 mm24 partsGPL-2.015
Cb usb
25.4 × 55.8 mm22 partsGPL-2.015
RGB driver board for panStamp
25.4 × 55.8 mm13 partsGPL-2.015
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k