CC-Sensor
Parsa2820·CC-Sensor-PCB
About the CC-Sensor PCB
CC-Sensor is an open source PCB design by Parsa2820, published on GitHub. It is a 4-layer board measuring 60 × 60 mm, with 28 components from 17 distinct parts.
Other key parts include the TPS22917DBV and MCP1702T-5002E/MB. By type, the board carries 10 connectors, 10 capacitors, 5 ICs, 1 jumper, 1 diode and 1 resistor.
It belongs with the sensors designs in this gallery.
From the project
PCB designed for CottonCandy air quality sensors
Main components on the CC-Sensor
CC-Sensor bill of materials (BOM)
28 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TPS22917DBV | SOT-23-6 | U1, U2, U3, U4 |
| 1 | MCP1702T-5002E/MB | SOT-89-3 | U5 |
| 1 | PM25_CONNECTOR | Molex_PicoBlade_53047-0810_1x08_P1.25mm_Vertical | J1 |
| 1 | OZONE_CONNECTOR | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | ADAFRUIT_SCD40_CONNECTOR | PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | ADAFRUIT_SHT4X_CONNECTOR | PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | PWR_OUT_1 | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | PWR_OUT_2 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | PWR_IN | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | I2C_CONNECTOR | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | EXT_PM25_CONNECTOR | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | EN_CONNECTOR | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 8 | 1u | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 2 | 4.7U 4.7u | C_0805_2012Metric | C9, C10 |
| 1 | 4.7kΩ | R_0603_1608Metric | R1 |
CC-Sensor design files
The KiCad project lives in the Parsa2820/CC-Sensor-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB-Test.kicad_pcb
- SchematicPCB-Test.kicad_sch
- BOMproductions/assembly/bom.csv
CC-Sensor: common questions
How big is the CC-Sensor PCB?
The CC-Sensor measures 60 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the CC-Sensor?
28 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CC-Sensor design files?
From the Parsa2820/CC-Sensor-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CC-Sensor design in my own project?
The repository has no license, so all rights stay with Parsa2820. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956