6 open source boards using the ARDUINO_NANO_RP2040_CONNECT
Real designs built with the ARDUINO_NANO_RP2040_CONNECT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 16 partsAVR/Arduino
RotorRig-V1.0
GrzegorzG7
16 partsCC-BY-NC-4.01 AVR/Arduino
DuckBoard75
MrDuck354
363.1 × 134.5 mm170 parts2LNo license0AVR/Arduino
SSEverythingMainBoardv2
paulbuzzby
99.1 × 81.3 mm63 parts4LNo license0RP2040/RP2350
FocMotorController
Glitch752
72.8 × 52.5 mm55 parts4LNo license0AVR/Arduino
GeminiArduinoMez
paulbuzzby
62.6 × 81.3 mm9 parts2LNo license0AVR/Arduino
SSMezBoard
paulbuzzby
30 × 60 mm9 parts2LNo license0
The ARDUINO_NANO_RP2040_CONNECT in open source designs
The gallery holds 6 open source boards using the ARDUINO_NANO_RP2040_CONNECT from 4 GitHub repositories; a typical one measures about 72.8 × 81.3 mm and carries around 36 components.
60% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is RotorRig-V1.0 by GrzegorzG7.
Microcontrollers on boards using the ARDUINO_NANO_RP2040_CONNECT
What boards using the ARDUINO_NANO_RP2040_CONNECT are built for
ARDUINO_NANO_RP2040_CONNECT: common questions
Where can I find a ARDUINO_NANO_RP2040_CONNECT reference design?
Each of the 6 boards on this page is a real design using the ARDUINO_NANO_RP2040_CONNECT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ARDUINO_NANO_RP2040_CONNECT use?
Most are built on AVR/Arduino (5) and RP2040/RP2350 (1).
How big is a typical board using the ARDUINO_NANO_RP2040_CONNECT?
The median is 72.8 × 81.3 mm, and 60% are two-layer designs.
What is the most popular open source board using the ARDUINO_NANO_RP2040_CONNECT?
By GitHub stars, RotorRig-V1.0 by GrzegorzG7, with 1 stars.
Can I simulate one of these boards using the ARDUINO_NANO_RP2040_CONNECT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.