44 open source boards using the ESP32-WROVER

Real designs built with the ESP32-WROVER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

44 boardsClear filters|Most starred

How designs wire the ESP32-WROVER

Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the ESP32-WROVER connects to, and the resistors, capacitors and other passives placed on it.

  • The IO16 pin is left unconnected on 28 of 28 designs.
  • The IO17 pin is left unconnected on 28 of 28 designs.
  • The SD2 pin is left unconnected on 27 of 28 designs.
  • The SD3 pin is left unconnected on 27 of 28 designs.
GNDpin 1, 15, 38, 39Connected to: GND 86%
VDD33pin 2Connected to: 3.3V 86%
  • Decoupling capacitor on 75% · 100 nF (20), 10 µF (9), 2.2 µF (6)
ENpin 3Connected to: PCAL6416AHF,128 39%, TPS3840PL27DBVR 32%
  • Pull-up to 3.3V on 57% · 10 kΩ (13), 100 kΩ (1), 470 Ω (1)
  • Capacitor to GND on 50% · 100 nF (9), 1 µF (5)
SENSOR_VPpin 4Connected to: A connector 21% · not connected 18%
  • Pull-up to 3.3V on 39% · 100 kΩ (7), 10 kΩ (3), 1 MΩ (1)
IO35pin 7Connected to: Signal 89%
  • Series resistor on 46% · 100 kΩ (13), 10 kΩ (1), 68 Ω (1)
SD2pin 17Connected to: Not connected 96%
SD3pin 18Connected to: Not connected 96%
CMDpin 19Connected to: Not connected 96%
CLKpin 20Connected to: Not connected 96%
SD0pin 21Connected to: Not connected 96%
SD1pin 22Connected to: Not connected 96%
IO0pin 25Connected to: A connector 21%
  • Pull-up to 3.3V on 46% · 10 kΩ (12), 1 kΩ (1)
IO16pin 27Connected to: Not connected 100%
IO17pin 28Connected to: Not connected 100%
NCpin 32Connected to: Not connected 100%
IO21pin 33Connected to: PCAL6416AHF,128 36%, a connector 29%, PCF85063A 21%
  • Pull-up to 3.3V on 36% · 10 kΩ (8), 3.3 kΩ (1), 4.7 kΩ (1)
RXD0pin 34Connected to: Signal 100%
  • Series resistor on 54% · 1 kΩ (12), 0 Ω (1), 1.2 kΩ (1)
TXD0pin 35Connected to: Signal 100%
  • Series resistor on 57% · 1 kΩ (13), 0 Ω (1), 1.2 kΩ (1)
IO22pin 36Connected to: PCAL6416AHF,128 36%, a connector 29%, PCF85063A 21%
  • Pull-up to 3.3V on 39% · 10 kΩ (8), 100 kΩ (1), 3.3 kΩ (1)

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-Eurorack-Audio by ctag-fh-kiel, Sony scopeman by lucysrausch, ClimateSprinklerController by kbx81 and Zerowriter Inkplate 5 Gen2 by zerowriter.

The ESP32-WROVER in open source designs

The gallery holds 44 open source boards using the ESP32-WROVER from 29 GitHub repositories; a typical one measures about 100 × 76.6 mm and carries around 177 components.

80% are two-layer designs, the rest use four layers or more, and 73% carry an open source license.

The most starred is ESP32-wroover adapter pan by pcbreflux.

Microcontrollers on boards using the ESP32-WROVER

ESP32-WROVER: common questions

Where can I find a ESP32-WROVER reference design?

Each of the 44 boards on this page is a real design using the ESP32-WROVER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-WROVER IO16 pin connected?

The IO16 pin is left unconnected on 28 of 28 designs. Counted from the KiCad layouts of 28 open source designs using the ESP32-WROVER.

How is the ESP32-WROVER IO17 pin connected?

The IO17 pin is left unconnected on 28 of 28 designs. Counted from the KiCad layouts of 28 open source designs using the ESP32-WROVER.

How is the ESP32-WROVER SD2 pin connected?

The SD2 pin is left unconnected on 27 of 28 designs. Counted from the KiCad layouts of 28 open source designs using the ESP32-WROVER.

What parts are used alongside the ESP32-WROVER?

The CH340C, TPS7A2633DRVR, PCAL6416AHF,128, PCF85063A and TPS3840PL27DBVR appear in the most repositories here.

Which microcontrollers do boards using the ESP32-WROVER use?

Most are built on ESP32 (44).

How big is a typical board using the ESP32-WROVER?

The median is 100 × 76.6 mm, and 80% are two-layer designs.

What is the most popular open source board using the ESP32-WROVER?

By GitHub stars, ESP32-wroover adapter pan by pcbreflux, with 608 stars.

Can I simulate one of these boards using the ESP32-WROVER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part