Sensor

perpuchaty·MQTT-Geiger-Counter·Sensor PCB/sensor/sensor.kicad_pcb

Sensor PCB layout, top view — open source board by perpuchaty

About the Sensor PCB

Sensor is an open source PCB design by perpuchaty, published on GitHub. It is a 2-layer board measuring 185 × 46 mm, with 3 components from 3 distinct parts.

It belongs with the iot & wireless, sensors and science & space designs in this gallery.

From the project

Portable Geiger counter with WiFi and MQTT. Home assistant compatible

This repository contains the hardware design files for a Geiger counter project.

- Hardware only: KiCad projects, fabrication outputs, and assembly files. - Firmware/software is intentionally managed separately from this hardware snapshot.

The project is organized as three PCB blocks:

1. Mainboard/ - Main KiCad project and schematic hierarchy (Project/) - Production outputs (Production/Gerber/, Production/Assembly/) - Supporting datasheets (Datasheets/)

Sensor, from the project README
From the project README

Sensor bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LJ-1.5LT-3P
Conn_01x01_Socket
J1
1
TYPE-C-31-M-12
Conn_01x01_Socket
J2
1
LJ-1.5LT-3P
J5

Sensor design files

The KiCad project lives in the perpuchaty/MQTT-Geiger-Counter repository on GitHub; these links point at the commit this page was built from.

Sensor: common questions

How big is the Sensor PCB?

The Sensor measures 185 × 46 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensor?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sensor design files?

From the perpuchaty/MQTT-Geiger-Counter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sensor design in my own project?

The repository has no license, so all rights stay with perpuchaty. Use it as a reference, and ask the author before reusing the design.

More boards in MQTT-Geiger-Counter

Similar boards