Geiger Counter

perpuchaty·MQTT-Geiger-Counter·Mainboard/Project/Geiger Counter.kicad_pcb

Geiger Counter PCB layout, top view — open source ESP32 board by perpuchaty

About the Geiger Counter PCB

Geiger Counter is an open source ESP32 PCB design by perpuchaty, published on GitHub. It is a 2-layer board measuring 85 × 75 mm, with 125 components from 61 distinct parts.

Its main chip is the ESP32-C6FH4, from the ESP32 family. Other key parts include the CL1651BA, FM5332D, TP4056-42-ESOP8, ADUM3160 and B0505S-2WR3. By type, the board carries 45 resistors, 36 capacitors, 16 diodes, 11 transistors, 6 ICs and 5 inductors.

It belongs with the iot & wireless and science & space designs in this gallery.

From the project

Portable Geiger counter with WiFi and MQTT. Home assistant compatible

This repository contains the hardware design files for a Geiger counter project.

- Hardware only: KiCad projects, fabrication outputs, and assembly files. - Firmware/software is intentionally managed separately from this hardware snapshot.

The project is organized as three PCB blocks:

1. Mainboard/ - Main KiCad project and schematic hierarchy (Project/) - Production outputs (Production/Gerber/, Production/Assembly/) - Supporting datasheets (Datasheets/)

Geiger Counter, from the project README
From the project README

Main components on the Geiger Counter

Geiger Counter bill of materials (BOM)

125 components, 61 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CL1651BA
ETA3485S2F
IC6
1
FM5332D
IC8
1
TP4056-42-ESOP8
U1
1
ESP32-C6FH4
U2
1
ADUM3160
U3
1
B0505S-2WR3
U4
2
BSS314PEH6327XTSA1
AP2301
Q1, Q3
1
BC817W,115
Q2
1
DI2579N
Q4
1
2N7002
Q5
6
BC817W,115
Q10, Q11, Q12, Q13, Q14, Q15
1
40MHZ
40MHz
Y1
2
LJ-1.5LT-3P
J1, J5
1
GSB1C41110SSHR
TYPE-C-31-M-12
J2
1
FC-05A8P11H20
J7
1
QMB-09B-03
BZ1
1
SS14
D1
3
BAS70X
D2, D3, D4
1
AU1PK-M3/84A
D5
4
MM1W82
D6, D7, D8, D9
Show 41 more
QtyPartRefs
1
KPTR-3216ZGC
D10
1
??
D12
5
PESD5V0F1BL
D13, D14, D15, D16, D17
1
91R
0R
L1
1
SMNR4020-2.2UH
2.2uH
L2
1
FNR6045S153KT
15mH
L3
1
2NH
0R
L4
1
0R
L5
6
CL05A106MP5NUNC
10uF
C6, C7, C8, C11, C12, C96
7
TCC0201X7R104K160ZT
100nF
C9, C17, C18, C21, C35, C38, C41
2
GRM0335C1H220JA01D
22pF
C10, C27
1
CL05A225KO5NQNC
2.2uF
C13
5
GRM0335C1H220JA01D
100nF
C14, C25, C28, C33, C34
1
GRM0335C1H220JA01D
0.75pF
C16
2
TCC0201X7R104K160ZT
22pF
C22, C24
2
CA45-P-10V-10uF-K
10uF
C23, C81
2
C322J10458P40001
100nF
C26, C42
2
GRM0335C1H220JA01D
1uF
C29, C32
2
GRM0335C1H220JA01D
10uF
C30, C31
2
TCC0201X7R104K160ZT
10uF
C39, C40
2
FV43X104K102EGG
100nF
C43, C44
2
RC0201FR-074K7L
4k7
R2, R4
3
RC0201FR-0710KL
10k
R3, R7, R12
1
PT0402FR-7T0R4L
0R2
R5
1
RC0201FR-072K2L
2k
R6
4
RC0201FR-07100KL
100k
R8, R13, R40, R41
1
RC0201FR-076K19L
2k7
R9
1
RC0201FR-071KL
18k
R10
1
RC0201FR-072K2L
2k2
R11
1
RC0201FR-0722KL
22k
R14
1
RC0201FR-07220RL
220R
R15
5
RC0201FR-07100KL
1k
R16, R18, R35, R38, R42
5
RC0201FR-07100KL
10k
R17, R39, R43, R44, R45
1
RC0201FR-07100KL
47M
R19
1
RC0201FR-07100KL
4.7M
R20
4
RC0201FR-07100KL
20M
R21, R24, R25, R30
1
RC0201FR-07100KL
2M
R22
2
RC0201FR-07100KL
100k
R23, R36
2
RC0201FR-075K1L
5k1
R26, R27
4
RC0201FR-070RL
0R
R28, R29, R37, R46
4
RC0201FR-07100KL
1M
R31, R32, R33, R34

Geiger Counter design files

The KiCad project lives in the perpuchaty/MQTT-Geiger-Counter repository on GitHub; these links point at the commit this page was built from.

Geiger Counter: common questions

What microcontroller does the Geiger Counter use?

The Geiger Counter is built around the ESP32-C6FH4, from the ESP32 family.

How big is the Geiger Counter PCB?

The Geiger Counter measures 85 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Geiger Counter?

125 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Geiger Counter design files?

From the perpuchaty/MQTT-Geiger-Counter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Geiger Counter design in my own project?

The repository has no license, so all rights stay with perpuchaty. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Geiger Counter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MQTT-Geiger-Counter

Similar boards