Buttons
perpuchaty·MQTT-Geiger-Counter·Button PCB/Buttons PCB/buttons.kicad_pcb
About the Buttons PCB
Buttons is an open source ESP32 PCB design by perpuchaty, published on GitHub. It is a 2-layer board measuring 60 × 22 mm, with 25 components from 13 distinct parts.
Its main chip is the ESP32-C6FH4, from the ESP32 family. Other key parts include the TP4056-42-ESOP8 and ADUM3160. By type, the board carries 6 jumpers, 6 capacitors, 3 ICs, 3 test points, 3 diodes and 3 resistors.
It belongs with the iot & wireless and science & space designs in this gallery.
From the project
Portable Geiger counter with WiFi and MQTT. Home assistant compatible
This repository contains the hardware design files for a Geiger counter project.
- Hardware only: KiCad projects, fabrication outputs, and assembly files. - Firmware/software is intentionally managed separately from this hardware snapshot.
The project is organized as three PCB blocks:
1. Mainboard/ - Main KiCad project and schematic hierarchy (Project/) - Production outputs (Production/Gerber/, Production/Assembly/) - Supporting datasheets (Datasheets/)

Main components on the Buttons
Buttons bill of materials (BOM)
25 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 TTP233H-BA6 | TSOT-23-6_HandSoldering | U1 |
| 1 | ESP32-C6FH4 TTP233H-BA6 | TSOT-23-6_HandSoldering | U2 |
| 1 | ADUM3160 TTP233H-BA6 | TSOT-23-6_HandSoldering | U3 |
| 1 | FC-05A8P11H20 | FPC_8 | J7 |
| 6 | Jumper_2_Open | R_0402_1005Metric | JP1, JP2, JP3, JP4, JP5, JP6 |
| 3 | TestPoint_Square | Touch_Pad_16x16 | TP1, TP2, TP3 |
| 1 | SS14 LED | D_1206_3216Metric | D1 |
| 2 | BAS70X LED | D_1206_3216Metric | D2, D3 |
| 5 | 10pF | C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 1 | 10UF 10pF | C_0402_1005Metric | C6 |
| 1 | 820R | R_0402_1005Metric | R1 |
| 1 | 4K7 820R | R_0402_1005Metric | R2 |
| 1 | 10K 820R | R_0402_1005Metric | R3 |
Buttons design files
The KiCad project lives in the perpuchaty/MQTT-Geiger-Counter repository on GitHub; these links point at the commit this page was built from.
Buttons: common questions
What microcontroller does the Buttons use?
The Buttons is built around the ESP32-C6FH4, from the ESP32 family.
How big is the Buttons PCB?
The Buttons measures 60 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buttons?
25 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Buttons design files?
From the perpuchaty/MQTT-Geiger-Counter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Buttons design in my own project?
The repository has no license, so all rights stay with perpuchaty. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Buttons without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in MQTT-Geiger-Counter
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k