Usb c charging circuit
PeterEmad146·usb_c_charging_circuit·usb_c_charger/usb_c_charger.kicad_pcb
About the Usb c charging circuit PCB
Usb c charging circuit is an open source PCB design by PeterEmad146, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 76 × 32.3 mm, with 28 components from 24 distinct parts.
Other key parts include the BQ25606RGER, AP2112K-3.3 and MT3608. By type, the board carries 9 capacitors, 8 resistors, 3 ICs, 3 connectors, 2 diodes and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
A compact, high-efficiency USB-C charging circuit designed to negotiate Power Delivery (PD) protocols and safely charge Lithium-ion battery packs. This project aims to replace legacy barrel jacks with a modern, universal USB-C charging interface.
A compact, high-efficiency USB-C charging circuit designed to negotiate Power Delivery (PD) protocols and safely charge Lithium-ion battery packs. This project aims to replace legacy barrel jacks with a modern, universal USB-C charging interface.
USB-C Power Delivery (PD) Support: Negotiates 5V, 9V, 12V, 15V, or 20V depending on the source capabilities and configuration. High-Efficiency Switching: Uses a synchronous buck/boost topology to minimize heat dissipation. Battery Protection: Integrated Over-Voltage Protection (OVP), Over-Current Protection (OCP), and Thermal Shutdown. Charge Status…
Main components on the Usb c charging circuit
Usb c charging circuit bill of materials (BOM)
28 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25606RGER | QFN50P400X400X100-25N | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | JST_LiPo | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | 18650_Holder | BAT_1043 | J3 |
| 1 | SW_SPDT | SW_EG1218 | SW1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | SS34 | D_SMA | D2 |
| 1 | 1u | L_6.3x6.3_H3 | L1 |
| 1 | 4.7u | L_6.3x6.3_H3 | L2 |
| 3 | 1u | C_0805_2012Metric | C1, C7, C8 |
| 1 | 20u | C_1206_3216Metric | C2 |
| 2 | 10u | C_0805_2012Metric | C3, C5 |
| 1 | 47n | C_0805_2012Metric | C4 |
| 1 | 4.7u | C_0805_2012Metric | C6 |
| 1 | 22U | C_1206_3216Metric | C9 |
| 2 | 5.1k | R_0805_2012Metric | R1, R2 |
| 1 | 226 | R_0805_2012Metric | R3 |
| 1 | 160 | R_0805_2012Metric | R4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R_0805_2012Metric | R5 |
| 1 | 1k | R_0805_2012Metric | R6 |
| 1 | 22k | R_0805_2012Metric | R7 |
| 1 | 3k | R_0805_2012Metric | R8 |
Usb c charging circuit design files
The KiCad project lives in the PeterEmad146/usb_c_charging_circuit repository on GitHub; these links point at the commit this page was built from.
Usb c charging circuit: common questions
How big is the Usb c charging circuit PCB?
The Usb c charging circuit measures 76 × 32.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb c charging circuit?
28 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb c charging circuit design files?
From the PeterEmad146/usb_c_charging_circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Usb c charging circuit design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which PeterEmad146 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k