7 open source boards using the BQ25606RGER
Real designs built with the BQ25606RGER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RISC-V
MerlynCAM
YeetTheAnson
45 × 38 mm144 parts4LNo license1Charging circuit
vacuumsens
82.6 × 94.6 mm232 parts2LNo license0Telematics tracker
Immanueldavidckp
82 × 62 mm190 parts4LNo license0Usb c charging circuit
PeterEmad146
76 × 32.3 mm28 parts2LCERN-OHL-S-2.00Senseeker final
vacuumsens
82.6 × 94.6 mm232 parts2LNo license0ARCH
Terrapin-Rocket-Team
65 × 30 mm64 parts4LNo license17Temporarycircuit
vacuumsens
40.8 × 80.5 mm70 parts2LNo license0
How designs wire the BQ25606RGER
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BQ25606RGER connects to, and the resistors, capacitors and other passives placed on it.
- The ILIM pin has a resistor to GND on 4 of 5 designs, most often 160 Ω (then 270 Ω).
- The ICHG pin has a resistor to GND on 4 of 5 designs, most often 225 Ω (then 910 Ω).
- The TS pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 100 kΩ).
- The SYS-1 pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VACpin 1 | Connected to: -14V 60% · a signal 40% |
|
| NCpin 2 | Connected to: Not connected 100% | — |
| D+pin 3 | Connected to: Not connected 60% · a signal 40% | — |
| D-pin 4 | Connected to: Not connected 60% · a signal 40% | — |
| OTGpin 6 | Connected to: GND 60% · a signal 40% | — |
| ILIMpin 8 | Connected to: Signal 100% |
|
| ICHGpin 10 | Connected to: Signal 100% |
|
| TSpin 11 | Connected to: Signal 100% |
|
| VSETpin 12 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| BAT-1pin 13 | Connected to: Signal 60% · VBAT 40% |
|
| BATpin 14 | Connected to: Signal 60% · VBAT 40% |
|
| SYS-1pin 15 | Connected to: Signal 80% · VSYS 20% |
|
| SYSpin 16 | Connected to: Signal 80% · VSYS 20% |
|
| GND-1pin 17 | Connected to: GND 100% | — |
| GNDpin 18 | Connected to: GND 100% | — |
| SW-1pin 19 | Connected to: Signal 100% |
|
| SWpin 20 | Connected to: Signal 100% |
|
| BTSTpin 21 | Connected to: Signal 100% |
|
| REGNpin 22 | Connected to: Signal 100% |
|
| PMIDpin 23 | Connected to: Signal 100% |
|
| VBUSpin 24 | Connected to: -14V 80% · a signal 20% |
|
| EPpin 25 | Connected to: GND 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ARCH by Terrapin-Rocket-Team, MerlynCAM by YeetTheAnson, Telematics tracker by Immanueldavidckp and Usb c charging circuit by PeterEmad146.
The BQ25606RGER in open source designs
The gallery holds 7 open source boards using the BQ25606RGER from 5 GitHub repositories; a typical one measures about 76 × 62 mm and carries around 144 components.
57% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is ARCH by Terrapin-Rocket-Team.
Parts used alongside the BQ25606RGER
Microcontrollers on boards using the BQ25606RGER
What boards using the BQ25606RGER are built for
BQ25606RGER: common questions
Where can I find a BQ25606RGER reference design?
Each of the 7 boards on this page is a real design using the BQ25606RGER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BQ25606RGER ILIM pin?
The ILIM pin has a resistor to GND on 4 of 5 designs, most often 160 Ω (then 270 Ω). Counted from the KiCad layouts of 5 open source designs using the BQ25606RGER.
What resistor goes on the BQ25606RGER ICHG pin?
The ICHG pin has a resistor to GND on 4 of 5 designs, most often 225 Ω (then 910 Ω). Counted from the KiCad layouts of 5 open source designs using the BQ25606RGER.
What resistor goes on the BQ25606RGER TS pin?
The TS pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the BQ25606RGER.
Which microcontrollers do boards using the BQ25606RGER use?
Most are built on RISC-V (1).
How big is a typical board using the BQ25606RGER?
The median is 76 × 62 mm, and 57% are two-layer designs.
What is the most popular open source board using the BQ25606RGER?
By GitHub stars, ARCH by Terrapin-Rocket-Team, with 17 stars.
Can I simulate one of these boards using the BQ25606RGER before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.